Show simple item record

MICROCIRCUIT, LINEAR, ANALOG TO DIGITAL CONVERTER, 14-BIT, HYBRID

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:07:14Z
date available2017-09-04T16:07:14Z
date copyright02/10/1992
date issued1992
identifier otherSASWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/70458
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). This drawing describes device requirements for hybrid microcircuits to be processed in accordance with MIL-H-38534. Two product assurance classes, military high reliability (device class H) and space application (device class K) and a choice of case outlines and lead finishes are available and are reflect in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes H and K RHA marked devices shall meet the MIL-H-38534 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
     Device type                Generic number                       Circuit function           01                         SP9588                         14-bit A/D converter


This device class designator shall be a single letter identifying the product assurance level as follows:
   Device class                Device requirements documentation       H or K             Certification and qualification to MIL-H-38534


The case outline(s) shall be as designated in appendix C of MIL-M-38510, and as follows:
    Outline letter                                 Case outline           X               See figure 1 (32-lead, 1.750" × 1.150" × .220"), dual-in-line                           package


The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
    Digital voltage supply (VDD) - - - - - - - - - - - - - -   +7.0 V dc     Analog voltage supply (VAA)  - - - - - - - - - - - - - -   +7.0 V dc     Negative voltage supply (VEE)  - - - - - - - - - - - - -   −16.0 V dc     Negative voltage supply (VEE1)  - - - - - - - - - - - - -  −7.0 V dc     positive voltage supply (VCC)  - - - - - - - - - - - - -   +16.0 V dc     Analog to digital ground voltage - - - - - - - - - - - -   ±0.5 V dc     Logic output voltage range - - - - - - - - - - - - - - -   0 V dc to 7.0 V dc     Thermal resistance, junction-to-case (ΘJC) - - - - - - -   40°C/W     Power dissipation (PD) - - - - - - - - - - - - - - - - -   3.0 W     Lead temperature (soldering, 10 seconds) - - - - - - - -   +300°C     Storage temperature range  - - - - - - - - - - - - - - -   −65°C to +150°C     Junction temperature (TJ)  - - - - - - - - - - - - - - -   +170°C


     Digital voltage supply (VDD) - - - - - - - - - - - - - - -   +5.0 V dc      Analog voltage supply (VAA)  - - - - - - - - - - - - - - -   +5.0 V dc      Negative voltage supply (VEE)  - - - - - - - - - - - - - -   −15.0 V dc      Negative voltage supply (VEE1) - - - - - - - - - - - - - -   −5.0 V dc      Positive voltage supply (VCC)  - - - - - - - - - - - - - -   +15.0 V dc      Case operating temperature range (TC)  - - - - - - - - - -   −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for original use for Government microcircuit applications (original equipment), design applications, and logistic purposes.
languageEnglish
titleSMD-5962-90631num
titleMICROCIRCUIT, LINEAR, ANALOG TO DIGITAL CONVERTER, 14-BIT, HYBRIDen
typestandard
page15
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record