Show simple item record

MICROCIRCUIT, DIGITAL, HMOS, 8-BIT MICROCOMPUTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:07:44Z
date available2017-09-04T16:07:44Z
date copyright33945
date issued1992
identifier otherSBZWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/70904
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
       Device type        Generic number                     Circuit function             01                 8748H                        8-bit microcomputer


The device class designator shall be a single letter identifying the product assurance level as follows:
       Device class               Device requirements documentation              M                     Vendor self-certification to the requirements for non-JAN class B                                   microcircuits in accordance with 1.2.1 of MIL-STD-883            B or S                  Certification and qualification to MIL-M-38510            Q or V                  Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
       Outline letter     Descriptive designator      Terminals     Package style               Q            GDIP1-T40 or CDIP2-T40         40         Dual-in-line


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is fop use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
TABLE
TABLE
TABLE
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90512num
titleMICROCIRCUIT, DIGITAL, HMOS, 8-BIT MICROCOMPUTER, MONOLITHIC SILICONen
typestandard
page24
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record