Show simple item record

MICROCIRCUIT, LINEAR, HIGH SPEED, VOLTAGE COMPARATOR, WITH MASTER SLAVE FLIP FLOP, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:09:33Z
date available2017-09-04T16:09:33Z
date copyright33961
date issued1992
identifier otherSHAXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/72780
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-885 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflectod in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
      Device type                     Generic number                               Circuit function             01                             EL2019                         High speed voltage comparator with master                                                                          slave flip flop


The device class designator shall be a single letter identifying the product assurance level as follows:
       Device class                                     Device requirements documentation              M                             Vendor self-certification to the requirements for non-JAN class B                                           microcircuits in accordance with 1.2.1 of MIL-STD-883            B or S                          Certification and qualification to MIL-M-38510            Q or V                          Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
      Outline letter            Descriptive designator          Terminals               Package style              G                          NACY1-X8                     8                    Can             P                    GDIPI-T8 or CDIP2-T8               8                    Dual-in-line


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
   Supply voltage (VS) . . . . . . . . . . . . . . . .    ±18 V dc    Input voltage (VIN) . . . . . . . . . . . . . . . .    +VS to −VS    Differential input voltage  . . . . . . . . . . . .    Limited only by power supplies    Peak output current (IOP) . . . . . . . . . . . . .    50 mA    Continuous output current . . . . . . . . . . . . .    25 mA    Input current (Pins 1, 2, or 3) . . . . . . . . . .    ±10 mA    Input current (Pins 5 or 6) . . . . . . . . . . . .    ±5 mA    Junction temperature (TJ)   . . . . . . . . . . . .    +175°C    Storage temperature range   . . . . . . . . . . . .    −65°C to +150°C    lead temperature (soldering, 10 seconds). . . . . .    +300°C    Power dissipation (PD):       Case G . . . . . . . . . . . . . . . . . . . . .    1.0 W       Case P . . . . . . . . . . . . . . . . . . . . .    1.5 W    Thermal resistance, junction-to-case (ΘJC)  . . . .    See MIL-STD-1835    Thermal resistance, junction-to-ambient (ΘJA):      Case G  . . . . . . . . . . . . . . . . . . . . .    190°C/W      Case P  . . . . . . . . . . . . . . . . . . . . .    125°C/W


   Supply voltage (VS) . . . . . . . . . . . . . . . .     ±15 V dc    Ambient operating temperature range (TA). . . . . .     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-92128num
titleMICROCIRCUIT, LINEAR, HIGH SPEED, VOLTAGE COMPARATOR, WITH MASTER SLAVE FLIP FLOP, MONOLITHIC SILICONen
typestandard
page13
statusActive
treeDLA - CC - DLA Land and Maritime:;1992
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record