Show simple item record

MICROCIRCUITS, DIGITAL, HIGH SPEED CMOS, 2-INPUT, POSITIVE AND GATE WITH OPEN DRAIN OUTPUTS, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:10:58Z
date available2017-09-04T16:10:58Z
date copyright07/28/1988
date issued1988
identifier otherSKTUDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/74191
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example: CHART
The device type shall identify the circuit function as follows:
       Device type        Generic number          Circuit function              01                54HC09         Quad, 2-input, positive AND gate with                                                open drain outputs


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
     Outline letter                               Case outline             C                   D-1 (14-lead, .785" × .310" × .200"), dual-in-line package            2                   C-2 (20-terminal, .358" × .358" × .100"), square chip carrier package


    Supply voltage range 1/- - - - - - - - - - - - - - - -   −0.5 V dc to +7.0V dc     DC input voltage (VIN) - - - - - - - - - - - - - - - -   −0.5 V dc to VCC +0.5 V dc     DC output voltage (VOUT) - - - - - - - - - - - - - - -   −0.5 V dc to VCC +0.5 V dc     Clamp diode current- - - - - - - - - - - - - - - - - -   ±20 mA     DC output current (per pin)- - - - - - - - - - - - - -   ±25 mA     DC VCC or GND current (per pin)- - - - - - - - - - - -   ±50 mA     Storage temperature range- - - - - - - - - - - - - - -   −65°C to +150°C     Maximum power dissipation (PD) - - - - - - - - - - - -   500 mW 2/     Lead temperature (soldering, 10 seconds) - - - - - - -   +260°C     Thermal resistance, junction-to-case (θJC):       Cases C and 2- - - - - - - - - - - - - - - - - - - -   See MIL-M-38510, appendix C     Junction temperature (TJ)- - - - - - - - - - - - - - -   +175°C


    Supply voltage (VCC) - - - - - - - - - - - - - - - - -   +2.0 V dc to +6.0 V dc     Case operating temperature range (TC)- - - - - - - - -   −55°C to +125°C     Input rise or fall time:       VCC = 2.0 V- - - - - - - - - - - - - - - - - - - - -   0 to 1000 ns       VCC = 4.5 V- - - - - - - - - - - - - - - - - - - - -   0 to 500 ns       VCC = 6.0 V- - - - - - - - - - - - - - - - - - - - -   0 to 400 ns


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-88620num
titleMICROCIRCUITS, DIGITAL, HIGH SPEED CMOS, 2-INPUT, POSITIVE AND GATE WITH OPEN DRAIN OUTPUTS, MONOLITHIC SILICONen
typestandard
page11
statusActive
treeDLA - CC - DLA Land and Maritime:;1988
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record