Show simple item record

MICROCIRCUIT, DIGITAL, FAST, CMOS, OCTAL D-TYPE, FLIP-FLOP, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:11:18Z
date available2017-09-04T16:11:18Z
date copyright05/30/1989
date issued1989
identifier otherSLTUDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/74524
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example: CHART
The device types shall identify the circuit function as follows:
       Device type      Generic number                         Circuit function              01             54FCT534               Octal D-type flip-flops, with three-state outputs             02             54FCT534A              Octal D-type flip-flops, with three-state outputs


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
         Outline letter                                Case outline                  R            D-8 (20-lead, 1.060" × .310" × .200"), dual-in-line package                 S            F-9 (20-lead, .540" × .300" × .100"), flat package                 2            C-2 (20-terminal, .358" × .358" × .100"), square chip carrier package


  Supply voltage range - - - - - - - - - - - - - - - -   −0.5 V dc to +6.0 V dc   Input voltage range  - - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc   Output voltage range - - - - - - - - - - - - - - - -   −0.5 V dc to VCC + 0.5 V dc   DC input diode current (IIK) - - - - - - - - - - - -   −20 mA   DC output diode current (IOK)  - - - - - - - - - - -   −50 mA   DC output current  - - - - - - - - - - - - - - - - -   ±100 mA   Maximum power dissipation (PD)  2/ - - - - - - - - -   500 mW   Thermal resistance, junction-to-case (θJC) - - - - -   See MIL-M-38510, appendix C   Storage temperature range  - - - - - - - - - - - - -   −65°C to +150°C   Junction temperature (TJ)  - - - - - - - - - - - - -   +175°C   Lead temperature (soldering, 10 seconds) - - - - - -   +300°C


  Supply voltage range (VCC) - - - - - - - - - - - - -   +4.5 V dc to +5.5 V dc   Maximum low level input voltage (VIL)  - - - - - - -   0.8 V dc   Minimum high level input voltage (VIH) - - - - - - -   2.0 V dc   Case operating temperature range (TC)  - - - - - - -   −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-88655num
titleMICROCIRCUIT, DIGITAL, FAST, CMOS, OCTAL D-TYPE, FLIP-FLOP, MONOLITHIC SILICONen
typestandard
page13
statusActive
treeDLA - CC - DLA Land and Maritime:;1989
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record