درباره ما
IEEE 1242
Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
| contributor author | IEEE - The Institute of Electrical and Electronics Engineers, Inc. | |
| date accessioned | 2017-09-04T16:12:48Z | |
| date available | 2017-09-04T16:12:48Z | |
| date copyright | 06/26/1999 (R 2005) | |
| date issued | 2005 | |
| identifier other | BJSTIBAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/76056 | |
| description abstract | Foreword (This introduction is not a part of IEEE Std 1242-1999, IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants.) This guide was prepared by Working Group P1242 of the Petroleum and Chemical Industry Committee (PCIC) of the IEEE Industrial Applications Society with joint membership coordination from Project 9-39 of the Special Purpose Cable Subcommittee (No. 9) of the Insulated Conductor Committee (ICC) of the IEEE Power Engineering Society. This working group fulfilled a unique role by linking the user community represented by the PCIC membership with the cable manufacturing, utility, and consulting community represented by the ICC. Joint membership provided for ease of input to the guide and cable design solutions that could only have been accomplished in this manner. The purpose of this guide is to provide the user with current cable technology in order to specify and select power, control, and specialpurpose cable for use in the petroleum and chemical industry. Emphasis is placed on those areas of concern peculiar to the these industries, including such environmental effects as chemical atmospheres, hazardous areas, contamination, corrosion, and fire. Participants At the time this guide was completed, Working Group P1242 had the following membership: Donald A. Voltz, Chair Joseph H. Snow, Vice Chair Roger E. Barras Michael G. Bayer Justo Benitez Kenneth E. Bow Robert R. Brown Robert Bryce Thomas G. Campbell John Cancelosi Eli Contreras James M. Daly Kevork G. Dekmezian Robert Edwards Douglas E. Effenberger Rodney E. Ginger Barbara Jensen Lawrence J. Kelly Robert Konnick Sunita Kulkarni Vincent C. Kwon Carl C. Landinger Mark T. Leyton Mark E. Lowell Wayne Madden L. Bruce McClung David C. Mercier W. G. Morrison C. R. (Dick) Porcaro Franklin W. Roberts Gary Savage Robert Schoolcraft Edward H. Shuler Joseph P. Stees H. R. Stewart Bill Taylor Jan Visser Craig M. Wellman William D. Wilkens The following members of the balloting committee voted on this guide: George P. Alexander J. Kirk Armintor Andrew Bagley Frederick Bried Robert R. Brown Malcolm M. Cameron William F. Casper James M. Daly John Davis Frank DeWinter Gary Donner Richard L. Doughty Marcus O. Durham John B. Dwyer Thomas E. Dye Hal B. Dygert Kimberly Eastwood Willian F. Ecton Richard Epperly C. James Erickson Eugene J. Fagan H. Landis Floyd Stephen W. Hagemoen Paul S. Hamer Frank P. Hogan Richard H. Hulett John Hus Ben C. Johnson John H. Kassebaum P. Michael Kinney William H. Levers Wayne Madden George Mahl William E. McBride Bill McCarty Bob McDaniel Ed F. Merrill Paul W. Myers Lorraine K. Padden Tom P. Pearson John E. Propst Sam L. Ralston Milton H. Ramsey Quentin Reynolds James F. Rozsits Chet Sandberg Scott W. Shannon Tom Shaw Paul J. Skobel Andrew W. Smith H. R. Stewart Jay A. Stewart Frank Stone Donald A. Voltz Barry M. Wood Bob Zahn Donald W. Zipse When the IEEE-SA Standards Board approved this guide on 26 June 1999, it had the following membership: Richard J. Holleman, Chair Donald N. Heirman, Vice Chair Judith Gorman, Secretary Satish K. Aggarwal Dennis Bodson Mark D. Bowman James T. Carlo Gary R. Engmann Harold E. Epstein Jay Forster* Ruben D. Garzon James H. Gurney Lowell G. Johnson Robert J. Kennelly E. G. “Al” Kiener Joseph L. Koepfinger* L. Bruce McClung Daleep C. Mohla Robert F. Munzner Louis-François Pau Ronald C. Petersen Gerald H. Peterson John B. Posey Gary S. Robinson Akio Tojo Hans E. Weinrich Donald W. Zipse *Member Emeritus Also included is the following nonvoting IEEE-SA Standards Board liaison: Robert E. Hebner Yvette Ho Sang IEEE Standards Project Editor Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEE Licensee=IHS Employees/1111111001, User=Every, David No reproduction or networking permitted without license from IHS Not for Resale, 08/26/2006 14:56:38 MDT Scope This guide provides information on the specification and selection of power, control, and special-purpose cable, as typically used in petroleum, chemical, and similar plants. It addresses materials, design, testing, and applications. More recent developments such as strand filling, low-smoke, zero-halogen materials and chemical-moisture barriers have been included. This guide is not intended to be a design document, although many of the problems associated with the specification and selection of power, control, and special-purpose cable for petroleum and chemical plant applications can be avoided by considering the information presented in this guide. It is recognized that there may be other types of cable used in the petroleum and chemical industries, especially considering the global marketplace. This guide should not be interpreted as precluding the use of such cables. | |
| language | English | |
| title | IEEE 1242 | num |
| title | Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants | en |
| type | standard | |
| page | 86 | |
| status | Active | |
| tree | IEEE - The Institute of Electrical and Electronics Engineers, Inc.:;2005 | |
| contenttype | fulltext | |
| subject keywords | cable insulation | |
| subject keywords | low-voltage cable | |
| subject keywords | medium-voltage cable |
