درباره ما
MIL-I-15265C
INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING)
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T16:17:06Z | |
| date available | 2017-09-04T16:17:06Z | |
| date copyright | 06/11/1992 | |
| date issued | 1992 | |
| identifier other | TBSWDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/80436 | |
| description abstract | This specification covers plastic, electrical insulating materials used primarily for covering submarine bus bars and battery intercell connections. Other applications may be considered where a tough plastic covering is needed over metal surfaces. Plastic electrical insulation shall be of the following types, as specified (see 6.2): Type Description P Resin - plasticizer dispersion (plastisol) Intended Use: This insulation is intended for covering bus bars, primarily on submarines, where a flame resistant, tough, non-porous, good dielectric covering is needed. The type P material provides a build of approximately 0.060 to 0.070 inches. This insulation shall not be used in applications where the continuous operating hot spot temperature exceeds 221 °F (105 °C) Instructions for applying these materials to submarine battery bus bars and connectors is contained in the appendix to this specification. | |
| language | English | |
| title | MIL-I-15265C | num |
| title | INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992 | |
| contenttype | fulltext | |
| subject keywords | Abrasion resistance | |
| subject keywords | Acid resistance | |
| subject keywords | Flame resistance | |
| subject keywords | Gravity | |
| subject keywords | Nonvolatiles |
