Show simple item record

GUIDELINES FOR DESC DRAWINGS PROCEDURES, REQUIREMENTS AND TABULATION OF DESC DRAWINGS PREPARED BY DESC-ELP

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:18:27Z
date available2017-09-04T16:18:27Z
date copyright09/01/1995
date issued1995
identifier otherTFRZDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/81958
description abstractwhen an immediate need for a part has been shown and insufficient time exists for preparation of a complete specification, a "skeleton" document in the form of a DESC drawing is prepared. DESC drawing requirements may be developed during Parts Control Board (PCB) meetings with input form each of the members requiring the drawing for purchase of parts. Drawings may also be generated when multiple application of the part is observed and no other action is planned in the near future. Drawings covering the parts in question are then prepared by DESC and presented to the PCB for review and approval. Once approved, the DESC prepared drawings are to be used by the contractor to procure parts, in lieu of each contractor preparing his own.
DDL-103 provides a tabulation and cross reference of DESC drawings and vendor similar part numbers, and provides guidelines and procedures for the initiation and preparation of such drawings.
languageEnglish
titleDESC-DDL-103-33num
titleGUIDELINES FOR DESC DRAWINGS PROCEDURES, REQUIREMENTS AND TABULATION OF DESC DRAWINGS PREPARED BY DESC-ELPen
typestandard
page190
statusActive
treeDLA - CC - DLA Land and Maritime:;1995
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record