MIL-DTL-5070F (3)
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:19:27Z | |
| date available | 2017-09-04T16:19:27Z | |
| date copyright | 02/10/2011 | |
| date issued | 2011 | |
| identifier other | TICJYDAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/82869 | |
| description abstract | This specification covers general requirements for adapter, hose to tube, pipe, and flange, reusable - hydraulic, fuel, and oil lines.Intended Use: The reusable adapters covered by this specification are intended for use with hose conforming to MIL-DTL-8794 in fabricating flexible hose assemblies following such practices as in MIL-DTL-8795. The hose assemblies are intended for use in hydraulic, fuel, and oil lines. Flanged type fittings covered by MS27228, MS27230, and MS27232 are normally intended to be used only on fuel and oil lines. The adapters covered by this specification are militarily unique because of the systems operating in an environment from -65°F to +250°F (-53.89°C to +121.11°C) and must meet the 96 hour salt spray requirement. Commercial products are not manufactured to operate at these extreme temperatures and would experience catastrophic failure. | |
| language | English | |
| title | MIL-DTL-5070F (3) | num |
| title | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR | en |
| type | standard | |
| page | 31 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;2011 | |
| contenttype | fulltext | |
| subject keywords | Assembly | |
| subject keywords | Cadmium | |
| subject keywords | Fitting | |
| subject keywords | Fluid connector | |
| subject keywords | Nipple | |
| subject keywords | Socket | |
| subject keywords | Zinc |

درباره ما