DLA - CC - DLA Land and Maritime: Recent submissions
Now showing items 6601-6620 of 11453
-
MIL-C-17/218
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
DSCC-DWG-07002 REV C
Abstract: This drawing describes the requirements for a 3 watt, fixed, surface mounted, wirewound, power type resistor.Intended Use: Surface mount resistors are used in electronic circuits where space is a major concern. -
SMD-5962-99615 REV B
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
DSCC-DWG-09016 REV A
Abstract: This drawing describes the requirements for a fixed, film, resistor network with 27 pad ball grid array.Intended Use: Resistors conforming to this drawing are intended for use when military specifications do ... -
SMD-5962-96518 REV G
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected ... -
DESC-DWG-89021 REV E
Abstract: This drawing describes the requirements for aluminum oxide, electrolytic capacitors.Intended Use: Capacitors conforming to this drawing are intended for use when military specifications do not exist and ... -
SMD-5962-90807 REV E
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-90629 REV B
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. Intended Use: Microcircuits conforming to this drawing ... -
SMD-5962-83001 REV E
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ... -
MIL-DTL-52471F (1)
Abstract: This specification covers pressure-type, wire-reinforced, rubber, hydraulic hose and hose assemblies. The core of this specification uses SAE-J517. The operating pressures range between 625 psi to 7,500 psi (4.3 to 48.3 ...Subject(s) : Automotive , Flexible , Fluid , Ground carts , Layline , Ozone , Permanent , Reusable , Test stands , Wire reinforced , -
DESC-DWG-94018 REV H
Abstract: This drawing describes the requirements for a 0.250 by 0.125 chip resistor, which is resistant to the degrading effects of moisture while under power.Intended Use: Chip resistors are intended for use in thick ... -
SMD-5962-97626 REV B
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-94553 REV A
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...

درباره ما