DLA - CC - DLA Land and Maritime: Recent submissions
Now showing items 6801-6820 of 11453
-
DSCC-DWG-11019
Abstract: This drawing describes the requirements for inductors, SMD, chip. These inductors are composed of a single or double layer dielectric thin film and are of small size and tight tolerances.Intended Use: Inductors ... -
SMD-5962-94509 REV B
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-96858 REV C
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
DSCC-DWG-07018 REV A
Abstract: This drawing describes the requirements for a fixed, film, surface mount, 1.5 watts (50 watts with a heatsink) power device.Intended Use: The film resistors described herein are intended to be used where high ... -
DSCC-DWG-03003 REV B
Abstract: This drawing describes the requirements for a fixed, carbon film, high pulse voltage, .125 watt, resistor.Intended Use: The carbon film resistors described herein are intended to be used where high voltage ... -
SMD-5962-90930 REV A
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
MIL-PRF-19500/717
Abstract: This specification covers the performance requirements for non-hermetic, epoxy, surface mount 1,500 watt, bi-directional silicon transient voltage suppressor diodes. Three levels of product assurance are provided for each ... -
DSCC-DWG-07009 REV A
Abstract: This drawing describes the requirements for a 0.020 x 0.010 chip resistor.Intended Use: Chip resistors are intended for use in thick or thin film circuits where microcircuitry is intended, also, for use in ... -
MIL-C-39012/141B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
SMD-5962-95834 REV K
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-02552 REV C
Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ... -
SMD-5962-92004 REV D
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-89704 REV C
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ... -
MIL-PRF-19500/562E (1)
Abstract: This specification covers the performance requirements for a P-channel, enhancement-mode, MOSFET, power transistor intended for use in high density power switching applications. Four levels of product assurance are provided ... -
DSCC-VID-V62/07607
Abstract: This drawing documents the general requirements of a high performance 12-bit, 500 MSPS analog to digital converter microcircuit, with an operating temperature range of -55°C to +125°C.

درباره ما