Now showing items 7321-7340 of 11453

    • SMD-5962-92166 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • MIL-DTL-55302/55G (1) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-R-83725/15B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1983
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification sheet is approved for use by the Air Force Acquisition Logistics Division, Electronic Support Division (AFALD/PTES), Department of the Air Force, and is available for use by all Departments and Agencies ...
    • SMD-5962-94600 REV D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • DESC-DWG-81000 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2005
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-PRF-83536/37 (1) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2004
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-PRF-15160/15H 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • DSCC-DWG-12008 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes the requirements for a fixed, film, chip resistor of very low resistance values and a wide range of characteristics and tolerances, style 0705.Intended Use: Chip resistors are intended ...
    • DSCC-DWG-89047 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing covers the design and performance requirements for a power, socket, size 8, straight, solder, electrical contact.Intended Use: Contacts conforming to this drawing are intended for use when military ...
    • MIL-C-25516/20C VALID NOTICE 2 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2001
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-DTL-39030/13B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2003
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-DTL-49055/12C VALID NOTICE 2 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-DTL-83527B SUPP 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2003
      Organization : DLA - CC - DLA Land and Maritime
    • DSCC-DWG-84081 REV E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing and MIL-PRF-28861 describe the requirements for radio frequency interference filters and capacitors.Intended Use: Filters conforming to this drawing are intended for use when military specifications ...
    • MIL-DTL-8416C (1) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers one type of adapter designated Adapter, Headset-Microphone MX-1646( )/AIC. This adapter permits the use of low impedance dynamic headsets and microphones with equipment designed for use with 600-ohm ...
      Subject(s) : AGC , Audio , Clamp , Connector , Distortion , Dynamic , Noise , Schematic , Solder , Voltage , Whisker ,
    • DSCC-DWG-86031 REV J 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2005
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes the requirements for nonhermetically sealed solid state relays supplied to the Y level screen requirements of MIL-PRF-28750.Intended Use: Relays conforming to this drawing are intended ...
    • SMD-5962-92053 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • DSCC-DWG-01026 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-PRF-26542/9C REINST NOTICE 3 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • SMD-5962-86701 REV E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ...