Now showing items 8021-8040 of 11453

    • MIL-DTL-3933K SUPP 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the general requirements for radio and microwave frequency fixed attenuators, including chip, coaxial, leaded, and relay header attenuators (see 6.1).Intended Use: Attenuators covered ...
      Subject(s) : Connectors , Electrical , Flange , Interference , electromagnetic , Leads , Microwave , Qualification , Radio , Screening , Sensitivity , Stability , VSWR ,
    • SMD-5962-89713 REV G 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • MIL-DTL-25547C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2002
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers one type of loudspeaker, designated loudspeaker, permanent magnet, LS-211/AIC-13. This loudspeaker is a horn type unit with a frequency response of 200-7000 Hz, nominal 16 ohms voice coil impedance, ...
      Subject(s) : Acoustic quality , Air gap , Directional characteristic , Horn type unit , Impedance , Polarity , Sound pressure , Stray magnetic field , Transmit audio messages , Voice coil ,
    • SMD-5962-04249 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • SMD-5962-89553 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
    • SMD-5962-82007 REV D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ...
    • SMD-5962-76043 REV E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • MIL-J-641/8D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1982
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquiring the jacks described herein shall consist of this specification and the latest ...
    • MIL-PRF-83401H (1) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the general requirements for hermetically sealed (see 3.10) and nonhermetically sealed (see 3.10.1) networks. These networks consist entirely of fixed, film resistors, or fixed, film resistors and ...
      Subject(s) : DIP , Flat pack , Hermetically sealed networks , Nonhermetically sealed networks , SIP ,
    • A-A-55508E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This commercial item description CID covers the general requirements for fuseholder blocks which accommodate .406 inch (10.3 mm) X 1.5 inches (38.1 mm) fuse cartridges. Fuseholder blocks covered by this CID are intended ...
    • MIL-STD-883J 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • SMD-5962-08243 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device class Q and space application (device class V). A choice of case outlines and lead finishes are available and are reflected ...
    • SMD-5962-96783 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2009
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • DSCC-VID-V62/06679 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2006
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance 20 bit buffer/driver with 3-state outputs microcircuit, with an operating temperature range of -55°C to +125°C.
    • DSCC-DWG-93046 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
    • MS25308 REV L 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • SMD-5962-99518 REV D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • SMD-5962-90506 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
    • SMD-5962-09207 REV E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • MIL-PRF-55339/28B VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2001
      Organization : DLA - CC - DLA Land and Maritime