DLA - CC - DLA Land and Maritime: Recent submissions
Now showing items 8141-8160 of 11453
-
SMD-5962-91689 REV B
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
MIL-C-17/206A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
DSCC-VID-V62/04702 REV A
Abstract: This drawing documents the general requirements of a high performance 8-stage synchronous down counter microcircuit, with an operating temperature range of -40°C to +125°C. -
MIL-PRF-39012/6D
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the connectors described herein shall consist of this specification sheet and the ... -
DSCC-DWG-98022 REV B
Abstract: This drawing describes the requirements for insulated, fixed, film, 1 watt resistors available in ±2 percent, ±5 percent, and ±10 percent resistance tolerances. These resistors are capable of full-load ... -
SMD-5962-84150 REV F
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
SMD-5962-86055 REV A
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. Intended Use: Microcircuits conforming to this drawing ... -
DSCC-DWG-09002
Abstract: This drawing describes the requirements for a precision, fixed, film, high ohmic value resistors.Intended Use: Resistor used in electronic circuits where the resistance temperature coefficient must be tightly ... -
DSCC-DWG-04021 REV D
Abstract: This drawing and MIL-DTL-3965 describes the complete requirements for capacitors, fixed electrolytic (nonsolid electrolyte), Tantalum, (polarized, sintered slug) 85°C (Voltage derated to 125°C) Intended ... -
SMD-5962-86860 REV C
Abstract: This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.Intended Use: Microcircuits conforming to this drawing ...

درباره ما