Now showing items 9581-9600 of 11453

    • MIL-DTL-13486/5C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
    • DSCC-VID-V62/07610 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance dual-output low-dropout voltage regulator with power-up sequencing for split-voltage DSP systems, with an extended operating temperature range of ...
    • MIL-PRF-19207/16H 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
    • SMD-5962-98634 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1999
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • SMD-5962-99510 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ...
    • MIL-DTL-27434/8A VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • DSCC-VID-V62/07621 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents the general requirements of a high performance pulse width modulator controller microcircuit, with an operating temperature range of -55°C to +125°C.
    • SMD-5962-06242 REV B 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • DSCC-DWG-93073 REV D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2007
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes the requirements for a 0.080 X 0.050, thermally sensitive, chip resistor.
    • MIL-PRF-39023D (1) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the general requirements for precision, nonwirewound, variable resistors whose electrical output (in terms of percent of applied voltage) are linear or nonlinear with respect to the angular position ...
      Subject(s) : Cup , Linear , Multisection , Multiturn , Nonlinear , Single turn ,
    • MIL-DTL-38999/20G (2) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-PRF-19500/177H 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2010
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification covers the performance requirements for PNP silicon low-power transistors. Two levels of product assurance are provided for each device type as specified in MIL-PRF-19500.Intended Use: ...
    • SMD-5962-88585 REV C 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2008
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing describes device requirements for class H hybrid microcircuits to be processed in accordance with MIL-PRF-38534 and a choice of case outlines and lead finishes are available and are reflected in the Part or ...
    • MIL-C-28804/2D 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1991
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      [D circled] The requirements for acquiring the product described herein shall consist of this specification ...
    • SMD-5962-91605 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;1992
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application ...
    • MIL-PRF-6106/11E 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-DTL-55181/4D VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2013
      Organization : DLA - CC - DLA Land and Maritime
    • MIL-DTL-12883/45D (2) 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2011
      Organization : DLA - CC - DLA Land and Maritime
    • SMD-5962-03251 REV A 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime
      Abstract: This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number ...
    • MIL-DTL-27072/7D VALID NOTICE 1 

      Type: standard
      Source: DLA - CC - DLA Land and Maritime:;2012
      Organization : DLA - CC - DLA Land and Maritime