Show simple item record

MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 8-LINE CLOCK DRIVER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:24:10Z
date available2017-09-04T16:24:10Z
date copyright01/30/1996
date issued1996
identifier otherTUPZDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/87540
description abstractThis drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) identify the circuit function as follows:
      Device type       Generic number                 Circuit function            01             54CDC341          1-line to 8-line clock driver, TTL compatible inputs


The device class designator is a single letter identifying the product assurance level as follows:
      Device class                     Device requirements documentation             M             Vendor self-certification to the requirements for MIL-STD-883 compliant,                          non-JAN class level 8 microcircuits in accordance with MIL-PRF-38535,                          appendix A           Q or V          Certification and qualification to MIL-PRF-38535


The case outline(s) are as designated in MIL-STD-1835 and as follows:
      Outline Letter     Descriptive designator     Terminals     Package style             R             GDIP1-T20 or CDIP2-T20        20         Dual-in-line            S             GDFP2-F20 or CDFP3-F20        20         Flat pack            2             CQCC1-N20                     20         Square leadless chip carrier


The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.
     Supply voltage range (VCC) . . . . . . . . . . . . . . . . . . . .  −0.5 V dc to +7.0 V dc      DC input voltage range (VIN) . . . . . . . . . . . . . . . . . . .  −0.5 V dc to +7.0 v dc 4/      DC output voltage range in the high or power-off state (VOUT)  . .  −0.5 V dc to VCC + 0.5 V dc 4/      DC output current (IOL) (per output) . . . . . . . . . . . . . . .  +96 mA      DC input clamp current (IIK) (VIN < 0.0 V) . . . . . . . . . . . .  −18 mA      Storage temperature range (TSTG) . . . . . . . . . . . . . . . . .  −65°C to +150°C      Lead temperature (soldering, 10 seconds) . . . . . . . . . . . . .  +300°C      Thermal resistance, junction-to-case (ΘJC) . . . . . . . . . . . .  See MIL-STD-1835      Junction temperature (TJ)  . . . . . . . . . . . . . . . . . . . .  +175°C      Maximum power dissipation (PD) . . . . . . . . . . . . . . . . . .  374 mW 5/


     Supply voltage range (VCC) . . . . . . . . . . . . . . . . . .   +4.5 V dc to +5.5 V dc      Input voltage range (VIN)  . . . . . . . . . . . . . . . . . .   +0.0 V dc to VCC      Output voltage range (VOUT)  . . . . . . . . . . . . . . . . .   +0.0 V dc to VCC      Maximum low level input voltage (VIL)  . . . . . . . . . . . .   +0.8 V      Minimum high level input voltage (VIH) . . . . . . . . . . . .   +2.0 V      Maximum high level output current (IOH)  . . . . . . . . . . .   −48 mA      Maximum low level output current (IOL) . . . . . . . . . . . .   +48 mA      Case operating temperature range (TC)  . . . . . . . . . . . .   −55°C to +125)°C


     Fault coverage measurement of manufacturing         logic tests (MIL-STD-883, test method 5012) . . . . . . . .   XX percent 6/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-96761num
titleMICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 1-LINE TO 8-LINE CLOCK DRIVER, TTL COMPATIBLE INPUTS, MONOLITHIC SILICONen
typestandard
page18
statusActive
treeDLA - CC - DLA Land and Maritime:;1996
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record