NATO - North Atlantic Treaty Organization: Recent submissions

Now showing items 1021-1040 of 1523

    • NATO STANAG 7169 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2009
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to sufficiently standardise Image Maps prepared for use by NATO armed forces, in both hard and soft copy products; to enable forces familiar with such image maps prepared by one ...

    • NATO AOP-32 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2002
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: This AOP is related to STANAG 2818, which covers two AOPs:
      a. AOP-31: Demolition Materiel; Design Principles
      b. AOP-32: Demolition Materiel, Assessment and Testing of Safety and Suitability for ...

    • NATO STANAG 2475 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2002
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Scope:
      The aim of this agreement is to register national acceptance of AMedP-8, Volume I to be used by the Armed Forces of the ratifying nations.

    • NATO MXP 2(C) 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2003
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Scope
      This publication covers instructions for the ordering and conduct of AWW exercises; standardized instructions and associated safety procedures for CIC/AIO, Weapon Direction, Aviation, Data Link, Electronic Warfare, ...

    • NATO STANAG 2430 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2004
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: The aim of this agreement is to register national acceptance of AEngrP-2(B).

    • NATO AETP-05 VOL 3 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1986
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Although applicable to all cooperating communications systems, MISPEC is particularly applied to the electronic identification system IFF, employed as internationally agreed throughout NATO. However, a number of system ...

    • NATO AEP-5 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1988
      Organization : NATO - North Atlantic Treaty Organization

    • NATO STANAG 2291 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2010
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to register national acceptance of the AAP-51(A).

    • NATO ANEP-30 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1996
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: NATO Intra-ship Tactical Control and Data Handling Systems have unique requirements for real-time, fault tolerant information exchange between peer systems. The NATO Naval Intraship Network Independent Interface (NIIF) ...

    • NATO AJP-3.12(A) 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2010
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: FOREWORD
      Allied Joint Publication (AJP) 3.12 (A) Allied Doctrine for Military Engineering Support to Joint Operations outlines the organization, roles and responsibilities of military engineers in ...

    • NATO AJP-3.4.4 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2011
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Purpose
      AJP-3.4.4 provides a common NATO doctrine to guide commanders, staffs and forces engaged in the conduct of COIN. It also informs civil actors involved in security and stabilisation of the full ...

    • NATO STANAG 2050 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1989
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: The aim of this agreement is to standardize, for the use of the NATO forces, the statistical classification of diseases, injuries and causes of death.

    • NATO STANAG 4566 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2004
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to ensure that ε-Hexanitrohexaazaisowurtzitane (ε-CL-20) shall possess properties which make it suitable for military use and to provide, within NATO, an acceptable basis for ...

    • NATO STANAG 4443 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1998
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to standardize the uniaxial compressive test for explosive materials.
      The test described in Annex A and the test report sheet described in Annex B were developed to give every ...

    • NATO AOP-34 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1999
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: This Allied Ordnance Publication (AOP), is covered by STANAG 4242, Vibration Tests Method and Severities for Munitions Carried in Tracked Vehicles, and contains a vibration test method and test severities for munitions ...

    • NATO STANAG 1212 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2010
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to register national acceptance of AAP-8(F) including Change 2.

    • NATO STANAG 7142 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2002
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: Scope:
      The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage and peripheral control devices in a closely coupled hardware ...

    • NATO AMEPP-6 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2002
      Organization : NATO - North Atlantic Treaty Organization

    • NATO STANAG 7139 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;2006
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: AIM
      The aim of this agreement is to establish standard parameters for aircraft engine controls, switches, displays, numbering and fuel gauges.

    • NATO AWP-5 

      Type: standard
      Source: NATO - North Atlantic Treaty Organization:;1999
      Organization : NATO - North Atlantic Treaty Organization
      Abstract: The purpose of this publication is to define and document a suite of TDAs that are available for use by all NATO nations. In addition to this library of available, ready-to-use (i.e., executable) TDAs suitable for use on ...