Show simple item record

MICROCIRCUIT, LINEAR, 12-BIT, ANALOG-TO-DIGITAL CONVERTER, HYBRID

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:25:31Z
date available2017-09-04T16:25:31Z
date copyright01/12/1994
date issued1994
identifier otherTXZXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/88796
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). This drawing describes device requirements for hybrid microcircuits to be processed in accordance with MIL-H-38534. Two product assurance classes, military high reliability (device class H) and space application (device class K) and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes H and K RHA marked devices shall meet the MIL-H-38534 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
          Device type               Generic number                           Circuit function                 01                       AD9005B                            12-bit A/D converter


This device class designator shall be a single letter identifying the product assurance level as follows:
           Device class                        Device requirements documentation                H or K                     Certification and qualification to MIL-H-38534


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
       Outline letter    Descriptive designator          Terminals         Package style               X                See figure 1                  46             Dual-in-line


The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
     Positive supply voltage (+VS) . . . . . . . . . . . . . .     +6 V      Negative supply voltage (−VS) . . . . . . . . . . . . . .     −6 V      Analog input voltage (Pin 45) . . . . . . . . . . . . . .     ±3.0 V dc      Digital input voltage . . . . . . . . . . . . . . . . . .     −0.5 V to +VS      Digital output current  . . . . . . . . . . . . . . . . .     4 mA      Storage temperature range . . . . . . . . . . . . . . . .     −65°C to +150°C      Junction temperature (TJ) . . . . . . . . . . . . . . . .     +175°C  2/      Lead temperature (soldering, 10 seconds)  . . . . . . . .     +300°C


     +VS . . . . . . . . . . . . . . . . . . . . . . . . . . .     +4.75 V to +5.25 V      −VS . . . . . . . . . . . . . . . . . . . . . . . . . . .     −5.45 V to −4.95 V      Analog input voltage  . . . . . . . . . . . . . . . . . .     −1.024 V to +1.024 V      Logic "1" voltage . . . . . . . . . . . . . . . . . . . .     +2.0 V to +VS      Logic "0" voltage . . . . . . . . . . . . . . . . . . . .     0.0 to +0.8 V      Case operating temperature range (TC) . . . . . . . . . .     −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes.
languageEnglish
titleSMD-5962-90666 REV Anum
titleMICROCIRCUIT, LINEAR, 12-BIT, ANALOG-TO-DIGITAL CONVERTER, HYBRIDen
typestandard
page14
statusActive
treeDLA - CC - DLA Land and Maritime:;1994
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record