Show simple item record

Roofing - Safety Requirements for Low-Sloped Roofs - American National Standard for Construction and Demolition Operations

contributor authorASSE - ASSE/SAFE - American Society of Safety Engineers
date accessioned2017-09-04T16:27:16Z
date available2017-09-04T16:27:16Z
date copyright01/01/2006
date issued2006
identifier otherUCKZIBAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/90406
description abstractThis standard establishes safe operating practices for the installation, maintenance and removal of membrane roofing that is seamed or seamless on lowsloped roofs with a maximum slope of four and twelve. These types of roofs include but are not necessarily limited to: hot and cold built-up roofing, single-ply roofing, polyurethane foam (PUF) roofing, liquidtype roofing (Hypalon®, polyurethane, etc.), modified bitumens.
NOTE: This standard does not apply to composition or wood shingles, slate, tile and metal roofs that are normally installed on roofs with slopes four and twelve or greater.
languageEnglish
titleASSE A10.24num
titleRoofing - Safety Requirements for Low-Sloped Roofs - American National Standard for Construction and Demolition Operationsen
typestandard
page37
statusActive
treeASSE - ASSE/SAFE - American Society of Safety Engineers:;2006
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record