Show simple item record

MICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CURRENT LIMITING RESISTORS AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:27:56Z
date available2017-09-04T16:27:56Z
date copyright35031
date issued1995
identifier otherUEIZDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/91091
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes Q and M) and space application (device class V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class 3 microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device class M RHA marked devices shall meet the MIL-I-38535 appendix A specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
 Device class  Generic number                       Circuit function       01        54FCT2374T      Octal edge-triggered D-type flip-flop with current limiting resistors and                                three-state outputs, TTL compatible inputs and limited output voltage swing       02        54FCT2374AT     Octal edge-triggered D-type flip-flop with current limiting resistors and                                three-state outputs, TTL compatible inputs and limited output voltage swing       03        54FCT2374CT     Octal edge-triggered D-type flip-flop with current limiting resistors and                                three-state outputs, TTL compatible inputs and limited output voltage swing


The device class designator shall be a single letter identifying the product assurance level as follows:
 Device class     Device requirements documentation        M           Vendor self-certification to the requirements for non-JAN class B microcircuits in                   accordance with 1.2.1 of MIL-STD-883      Q or V        Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835, and as follows:
 Outline letter          Descriptive designator       Terminals       Package style        R                  GDIP1-T20 or CDIP2-T20          20           Dual-in-line       S                  GDFP2-F20 or CDFP3-F20          20           Flat pack       2                        CQCC1-N20                 20           Leadless chip carrier


The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
  Supply voltage range (VCC)  . . . . . . . . . . . . . . . . . . .  −0.5 V dc to +7.0 V dc   DC input voltage range (VIN)  . . . . . . . . . . . . . . . . . .  −0.5 V dc to VCC + 0.5 V dc  4/   DC output voltage range (VOUT)  . . . . . . . . . . . . . . . . .  −0.5 V dc to VCC + 0.5 V dc  4/   DC input clamp current (IIK) (VIN = −0.5 V) . . . . . . . . . . .  −20 mA   DC output clamp current (IOK) (VOUT = −0.5 V and +7.0 V)  . . . .  ±20 mA   DC output source current (IOH) (per output) . . . . . . . . . . .  −30 mA   DC output sink current (IOL) (per output) . . . . . . . . . . . .  +70 mA   DC VCC current (ICC)  . . . . . . . . . . . . . . . . . . . . . .  ±260 mA   Ground current (IGND)   . . . . . . . . . . . . . . . . . . . . .  +550 mA   Storage temperature range (TSTG)  . . . . . . . . . . . . . . . .  −65°C to +150°C   Case temperature under bias (TBIAS) . . . . . . . . . . . . . . .  −65°C to +135°C   Lead temperature (soldering , 10 seconds) . . . . . . . . . . . .  +300°C   Thermal resistance, junction-to-case (ΘJC)  . . . . . . . . . . .  See MIL-STD-1835   Junction temperature (TJ) . . . . . . . . . . . . . . . . . . . .  +175°C   Maximum power dissipation (PD)  . . . . . . . . . . . . . . . . .  500 mW


  Supply voltage range (VCC)  . . . . . . . . . . . . . . . . . . .  +4.5 V dc to +5.5 V dc   Input voltage range (VIN) . . . . . . . . . . . . . . . . . . . .  +0.0 V dc to VCC   Output voltage range (VOUT) . . . . . . . . . . . . . . . . . . .  +0.0 V dc to VCC   Maximum low level input voltage (VIL) . . . . . . . . . . . . . .  0.8 V   Minimum high level input voltage (VIH)  . . . . . . . . . . . . .  2.0 V   Case operating temperature range (TC) . . . . . . . . . . . . . .  −55°C to +125°C   Maximum input rise or fall rate (Δt/ΔV):     (from VIN = 0.3 V to 2.7 V, 2.7 V to 0.3 V) . . . . . . . . . .  5 ns/V   Maximum high level output current (IOH) . . . . . . . . . . . . .  −12 mA   Maximum low level output current (IOL)  . . . . . . . . . . . . .  12 mA


  Fault coverage measurement of manufacturing     logic tests (MIL-STD-883, test method 5012) . . . . . . . . . .  XX percent   5/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-93026num
titleMICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CURRENT LIMITING RESISTORS AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICONen
typestandard
page19
statusActive
treeDLA - CC - DLA Land and Maritime:;1995
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record