Show simple item record

RESISTOR, VARIABLE, NONWIREWOUND, (ADJUSTMENT TYPE) GENERAL SPECIFICATION FOR

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:28:30Z
date available2017-09-04T16:28:30Z
date copyright01/28/2011
date issued2011
identifier otherUFYKAEAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/91678
description abstractThis specification covers the general requirements for multiturn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70°C and 85°C, and are capable for continuous operation when properly derated, at a maximum temperature of 125°C and 150°C (see figure 1). These resistors have a resistance of ±10 percent.Intended Use: Resistors covered by this specification are intended for use in electronic equipment, and are used for matching, balancing, adjusting circuit variables in computers, telemetering equipment, and other critical applications. Resistors covered by this specification are unique due to the fact that these devices must be able to operate satisfactorily in military systems under the following demanding conditions: 20 Gs of high frequency vibration, 100 Gs of shock (specified pulse), undergo moisture resistance, setability, and salt corrosion test. In addition these military requirements are verified under a qualification system. Commercial components are not designed to withstand these military environmental conditions.
languageEnglish
titleMIL-PRF-22097J (2)num
titleRESISTOR, VARIABLE, NONWIREWOUND, (ADJUSTMENT TYPE) GENERAL SPECIFICATION FORen
typestandard
page31
statusRevised
treeDLA - CC - DLA Land and Maritime:;2011
contenttypefulltext
subject keywordsSingle turn


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record