درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1181-1200 of 2792
-
MIL-G-21569B
Abstract: This specification covers synthetic rubber O-rings and other forms of gaskets.
The gaskets shall be of the following classes, as specified (see 6.2).Class I - Oil resistant. Class II - High ...
-
MIL-S-17000/7A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-22249/18A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-PRF-24712A
Abstract: This specification covers powder coatings for interior steel, aluminum, copper-nickel and bronze equipment, furniture, and electrical box surfaces and on exterior steel, aluminum, copper-nickel, and bronze surfaces exposed ...Subject(s) : Adhesion , Application instruction , Color , Dielectric strength , Flexibility , Gel time , Marine environment , Material safety data sheets , Toxicity , Waste powder , -
A-A-59609
Abstract: This Commercial Item Description covers a flexible, single conductor cable, rated at 600 volts. This cable is intended for shipboard use.Subject(s) : 600 Volts , Cable , Shipboard Use , Single Conductor , Special Purpose , Welding , -
MIL-V-22052D
Abstract: This specification covers steel globe, angle, and Y pattern valves in sizes 2-½ inches and larger. Intended Use: Globe, angle, and Y pattern valves are intended for use in steam, water, and oil service. -
A-A-50620
Abstract: This commercial item description covers a combination pH and reference electrode which is used in conjunction with a digital indicating pH meter to measure the pH of boiler water aboard naval ships. The combination electrode ... -
MIL-PRF-32007 VALID NOTICE 1
Abstract: This specification covers a fully automated and self-contained Navy Integrated Membrane System (NIMS) capable of providing treatment of oily wastewater found onboard Naval vessels at a rate of 6.7 gallons per minute (gpm). ... -
MIL-HDBK-2141
Abstract: This standard contains definition, abbreviations, acronyms, units and symbols used in magnetic silencing. Definitions of abbreviations and terms are limited to statements of meaning as related to this and referenced ... -
MIL-H-24135/7A
Abstract: This specification covers synthetic rubber hoses, reinforced with four layers of heavy spiral wrap wire reinforcement in sizes -20, -24 and -32 for high pressure phosphate ester fluid applications. Intended Use: ...Subject(s) : Group V , Hydraulic fluid , -
MIL-P-22302A
Abstract: This specification covers the requirements applicable to the design and construction of turbine driven horizontal, centrifugal, close-coupled, single-stage boiler feed pumps on board Naval ships. Intended Use: ...Subject(s) : Bedplate , Casing , Impeller , Radial sleeve bearing , Steam turbine , -
MIL-PRF-19004B
Abstract: This specification covers centrifugal fans for use in Naval shipboard heating, ventilating, and air conditioning systems. Intended Use: The fan-motor units specified herein are intended for ventilation and ...Subject(s) : Hub , Impeller , Scroll , Vanes ,