درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 121-140 of 2792
-
MIL-V-22549D
Abstract: This specification covers angle relief valves of pressure tight spring housing construction for gas and oxygen service. Intended Use: All valves covered by this specification are intended for use in shipboard ... -
A-A-59871
Abstract: This commercial item description (CID) covers vacuum water closets (toilets) used with sewage vacuum, collection, holding, and transfer (VCHT) systems aboard ships.Intended Use: Vacuum water closets covered ...Subject(s) : Fixtures , plumbing , System , pollution control , System , sewage vacuum collection , holding and transfer (VCHT) , Toilet , vacuum , -
MS16568 REV C
Abstract: This standard has been approved by the BUREAU OF SHIPS, Department of the NAVY and is mandatory for use by that activity. All other military activities are required to employ this standard where suitable. -
MIL-C-24615A
Abstract: This specification covers nickel-chromium-molybdenum-columbium (Ni-Cr-Mo-Cb) (UNS N06625) alloy castings for corrosion-resistant service.
The alloy castings are classified as the following grades (see 6.2.1): ...Subject(s) : Metallographic , Nondestructive , Weldability , -
MIL-C-28754/74A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the connector-frame assembly described herein shall consist of this specification ... -
MIL-STD-2042-3B
Abstract: This standard practice provides detailed methods of optical fiber cable penetrations through ship structure and equipment via stuffing tubes, swage tubes, multiple cable penetrators, chafing collars and nipples.
These ...Subject(s) : Chafing collar , Collective protection system (CPS) , Kickpipes , Metal stuffing tubes , Multiple cable penetrator (MCP) , Nipple , Swage tubes , -
A-A-59730
Abstract: SCOPE. This Commercial Item Description (CID) covers the requirements for a tapered tube plug (TTP) which is used within a Blown Optical Fiber (BOF) tube to prevent movement of the BOF fibers or BOF bundles. Intended ... -
MIL-G-21410A
Abstract: This specification covers the performance and test requirements for speed-governing systems which sense speed and load and permit parallel operation of alternating current generator sets.
Speed governing systems are ...Subject(s) : Governor , Governor , Electro-Hydraulic (EH) , Governor , Load Sharing , Governor , Speed , Regulator , Speed , -
MIL-DTL-19379C
Abstract: This specification covers Mare Island Rubber Laboratory type resilient mounts used to support equipment on surface ships and submarines. This specification includes requirements and verification tests for the rubber compound ... -
MIL-M-3184C
Abstract: This specification covers the packaging (cleaning, drying, preservation, packing, and marking) requirements for machinery, such as capstans, davits, sliding padeyes, elevators, conveyors, cranes, hoists, stream transfer ...