درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1341-1360 of 2792
-
MIL-PRF-009000K
Abstract: This specification covers two grades (SAE 40 and SAE 15W40) of lubricating oil for use in advanced design high-output shipboard main propulsion and auxiliary diesel engines using fuel conforming to MILDTL- 16884 and ...Subject(s) : Engine oil , Main reduction gears , Marine diesel engines , Petroleum-base , Qualification , SAE 15W40 , SAE 40 , -
MIL-STD-419E
Abstract: This standard covers the requirements governing the basic methods of cleaning and protecting nonferrous and ferrous metal and alloyed pipe, tubing, and fittings prior to installation and after hydraulic tests in hydraulic ...Subject(s) : Hydrochloric acid , Hydrofluoric acid , Hydrostatic test , Long term (internal surfaces) , Nitric acid , Pickling test , Short term (internal surfaces) , Sodium dichromate , Sulfuric acid , System flushing , -
MIL-DTL-19772B
Abstract: This specification covers automatic temperature regulating valves for steam, water, and other fluid service where accurate temperature control of fluid is required. These valves are of the self-operated type requiring no ...Subject(s) : Direct acting , Fluid service valve , Reverse acting , Self-operated valve , Steam valve , Water valve , -
MIL-STD-769J
Abstract: The purpose of this standard is to prescribe the requirements for thermal insulation of piping, machinery, uptakes and mechanical equipment for ships of the U.S. Navy. Intended Use: The thermal insulation ...Subject(s) : Antisweat , Boiler uptakes , Cold and chilled water , Finishing cement , Metal lagging , Refrigerant , Unfired pressure vessels , -
MIL-PRF-24699A
Abstract: This specification covers the requirements for two types of acoustical transmission loss barrier material (see 6.1) Intended Use: Barrier materials furnished under this specification are intended for ...Subject(s) : Breaking strength , Flex stiffness , Peel strength , Surface density , Tearing strength , Warp , -
MIL-C-24368/5
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
QPL-TT-P-28-QPD
Abstract: QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER FEDERAL SPECIFICATION TT-P-28 PAINT, ALUMINUM, HEAT RESISTING (1200°F)
This list has been prepared for use by or for the Government in the acquisition of products ... -
MIL-H-24135/12
Abstract: This associated detail specification covers high performance synthetic rubber hoses, reinforced with a single layer of wire braid over a single layer of synthetic fiber braid in sizes -4 through -40 for medium pressure ...Subject(s) : Group VIII , Petroleum , Phosphate esters , Sea water , -
MIL-I-24178
Abstract: This specification covers semi-cured thermosetting resin treated, unidirectional glass electrical insulating tape intended for banding armatures of rotating electrical machines for shipboard use. Other applications may ... -
A-A-50634
Abstract: The General Services Administration has authorized the use of this commercial item description. -
MIL-S-24187/8A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all departments and agencies of the Department of Defense.
The requirements for ...