درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1381-1400 of 2792
-
MIL-F-24787/5
Abstract: This specification covers reusable hose to hose 90° elbow fittings for use with wire or synthetic fiber reinforced rubber hose.
The 90° elbow fittings shall be type D. See MIL-F-24787, table III for ...Subject(s) : Synthetic fiber , Wire , -
MIL-C-24707/6
Abstract: This specification covers 12 percent chromium steel castings for high temperatures and for impact at low temperatures.
Castings shall be furnished in the following grades and classes as specified (see 6.2). ...Subject(s) : Heat treatment , Mechanical properties , -
MIL-H-24146
Abstract: This specification covers foam-water fire extinguishing sprinkler heads for upright or pendant installation in overhead sprinkler systems. -
MIL-V-24694/2
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-B-24141A
Abstract: This specification covers single- and multiple-sheave tackle blocks, snatch blocks, and cargo hoisting blocks for use with wire rope. Intended Use: Single- and multiple-sheave tackle blocks, snatch blocks, ...Subject(s) : Becket , Bushing , Hook , Rig , Sheave , Shell , Strap , -
MIL-F-16377/30A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
DOD-K-24674
Abstract: This specification covers a water testing outfit using an organic dye for the determination of dissolved oxygen in feedwater. Intended Use: This test kit is to be used for the determination of dissolved ...Subject(s) : Ampoule , Color comparator , Color standards , Deaerated feedwater , Dissolved oxygen , Organic dye , Oxygen test kit , Reagent water , -
MIL-E-23765/3A
Abstract: This specification covers solid bare copper alloy electrodes and cut-length rods for use with the gas metal-arc (GMA) and gas tungsten-arc (GTA) welding processes. Intended Use: The copper and copper alloy ... -
DOD-B-24668
Abstract: This specification covers propulsion system thrust bearing units for naval submarines, where such units combine a hydrodynamic thrust bearing, a vibration reducer and a journal (radial) bearing in a common housing and ...Subject(s) : Hydrodynamic thrust bearing , Thrust bearing unit , Vibration reducer , -
MIL-I-24768/26
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification sheet ... -
MIL-C-22249/48
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-F-16377/4A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
[A circled]The complete requirements for ...