درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1521-1540 of 2792
-
MIL-C-28754/94
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-PRF-32171B
Abstract: This specification establishes the requirements for high durability, wear resistant deck coatings for use in high traffic areas, with minimal maintenance.Intended Use: The material covered by the specification ...Subject(s) : AFFF stations , Arsenic , Barium , Benzene , Cadmium , Chloroform , Ethylbenzene , Lead , Mercury , Paint , Perchloroethylene , Tetrachloroethylene , Toluene , Trichloroethylene , Xylene , -
DOD-STD-2143
Abstract: This standard covers the requirements that are imposed on materials and equipment which are to be installed on and that are pertinent to the magnetic silencing characteristics of nonmagnetic mine warfare ships and craft. ... -
MIL-DTL-22050E
Abstract: This specification covers rubber gaskets, packing, seals, strips, molded forms, and sheet material for use in hot air, hot water, steam, and various polar fluids such as aqueous monoethanolamine (MEA), at moderately high ...Subject(s) : Aqueous menothanolamine , Ethylene-prophlene elastomeric , Molded , O-rings , Seals , Sheets , strips , -
MIL-F-24787/4
Abstract: This specification covers reusable split clamp end fittings, and adapters for use with wire or synthetic fiber reinforced rubber hose. Intended Use: End fittings to this specification are intended for use ...Subject(s) : Elbow , Straight , Synthetic fiber , Wire , -
MIL-P-15006A
Abstract: This specification covers sheathing paper for covering thermal insulation for cold piping or tubing prior to lagging. -
MIL-C-22249/4A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
A-A-59780
Abstract: This Commercial Item Description (CID) covers plural component paint application equipment. Additional items and or services required under a specific purchasing contract are not identified in this CID. Plural component ...Subject(s) : Agitator , Hose , Pressure-feed , Pump , Regulator , Siphon-feed , Spray Gun , Whip Line , -
MIL-L-19140E
Abstract: This specification covers requirements for fire-retardant treated lumber and plywood, including laminated veneer lumber processed by pressure impregnation, using qualified fire-retardant chemical treatments. Intended ... -
MS15430
Abstract:INSPECTION STANDARD MASK, GAS, ND MARK V
Visual and Dimensional Inspection (classification of defects as per Standard MIL-STD-105) ... -
MIL-G-2767C
Abstract: This specification covers one type of rat guard to prevent rats from boarding ships.
Rat guards shall be of the following sizes, as specified (see 6.2):3-inch 5-inch 8-inch
... -
A-A-59491
Abstract: Abstract. This description covers requirements for a thread and gasket sealing compound that is resistant to fuel, engine oils, and water. The compound is a slow-drying black paste, setting into a pliable film; best suited ... -
A-A-59771
Abstract: This commercial item description covers a National Fire Protection Association (NFPA) 1981 compliant Self-Contained Breathing Apparatus (SCBA) to be used to provide breathing air for fire fighting and damage control ...Subject(s) : Air , CBRN , Cylinder , Damage control , Fire fighting , Investigator , Personnel protection equipment , Respirator , Safety equipment ,