درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1701-1720 of 2792
-
MIL-I-631D
Abstract: This specification covers only the basic characteristics required by the synthetic insulation material, as such, and the methods suited to their satisfactory determination.
Electrical insulation shall be of the following ... -
MIL-V-24384B
Abstract: This specification covers self-contained pressure regulating valves with a nominal pressure rating of 150 pounds per square inch (lb/in2) gauge for service in low pressure air or nitrogen systems. Intended ...Subject(s) : Bottom cap , Burst pressure , Gas dome , Nominal pressure rating , Pressure envelope , Proof pressure , Set pressure , Spring housing , -
MIL-C-17944A
Abstract: This specification covers electric capstans for use on Naval ships. Intended Use: It is intended that this specification be used for reference in Ship Specifications and for direct reference in contracts or ...Subject(s) : Capstan head , Electric brake , Gear reduction , Master switch , -
MIL-H-24135/8A
Abstract: This specification covers synthetic rubber hoses, reinforced with four plies of spiral wrapped wire in sizes -6 through -16 for high pressure hydraulic applications. Intended Use: Hose to this specification ...Subject(s) : Group II , Hydraulic fluid , -
DOD-P-24562A
Abstract: This specification covers general requirements for marine propellers of the controllable pitch type. Specific requirements will be in accordance with the contract or order. For this specification, a propeller shall be ... -
A-A-59010
Abstract: This commercial item description covers 120-volt standard navigation lights for use on ships over 65 feet (20 meters) in length operating in international waters, and Navy unique lights that are modified standard navigation ... -
MIL-E-15809D
Abstract: This specification covers tube expanders of the self-feeding type for use in expanding titanium, copper-nickel alloy or other non-ferrous alloy tubes in all types of tubular heat exchangers.
The following specifications ...Subject(s) : Collar sleeve , Rolled joint , Spare rolls , -
MIL-C-23842B
Abstract: This specification covers powered tray type vertical conveyors used to move palletized loads up to 3000 pounds aboard Naval ships. Only one classification of conveyor is covered by this specification. Intended ...Subject(s) : Cam track , Conveyor rated capacity , Liners , Pushbutton station , Roller chain , Sprocket assembly , Tray , Tray capacity , Tray carrier chain , Tray guide arm , Trunk , Vertical track , -
MIL-DTL-17060G
Abstract: This specification covers the requirements for three-phase, alternating current (AC) motors for shipboard use in frame sizes not less than 182.
Classification. Motors furnished in accordance with this specification ...Subject(s) : Driven auxiliaries , Induction , Squirrel-cage , Synchronous , -
MIL-STD-1622B CHANGE 1
Abstract: This standard provides the requirements for cleaning of compressed air systems and components. Each activity should implement the applicable requirements of this document through a locally prepared and approved procedure. ...Subject(s) : Trisodium phosphate (TSP) , -
MIL-S-24187/5A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all departments and agencies of the Department of Defense.
The requirements for ... -
MIL-S-24093/2
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring steel forgings and bars described herein shall consist of this specification ...