درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1741-1760 of 2792
-
A-A-59382A
Abstract: This Commercial Item Description (CID) covers two kit types of black, tubular, continuous, doublewall, reusable sleeves, in a minimum of 13 sizes, to provide corrosion and environmental protection for electrical and ...Subject(s) : Corrosion protection , Environmental protection sleeve , Reusable , Sleeve , -
MIL-H-24136/2A
Abstract: This specification covers synthetic fiber reinforced rubber hoses in sizes -4 through -32 for use in high pressure applications. Intended Use: Hose to this associated detail specification is intended for use ...Subject(s) : Braided , Group XI , -
MIL-C-24707/3
Abstract: This specification covers austenitic chromium-nickel alloy castings for corrosion-resistant and low magnetic permeability applications (see 6.1).
Corrosion-resistant steel castings shall be of the following ...Subject(s) : Heat treatment , Intergranular corrosion test , Magnetic permeability , Passivation , -
MIL-PRF-23236D
Abstract: This specification covers four types of air pollution regulated ship and structure coatings that comply with the National Emission Standards for Hazardous Air Pollutants (NESHAP) for shipbuilding for state and federal ...Subject(s) : Asbestos , Ballast , Boilerwater , Fuel , HAP , Hazardous air pollutants , Lead free , Paint , Potable , Powder coating , Seawater , Sewage , Tank , VOHAP , Volatile organic content , -
MIL-PRF-24623/6A
Abstract: The performance requirements specified herein cover fusion splice protectors suitable for military use with multi-mode or single-mode optical fibers.Intended Use: The splice and fusion splice protector are ... -
MIL-F-16377/29A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
A-A-59005
Abstract: This Commercial Item Description covers requirements for the Marine Sextant. The sextant is an endless tangent screw marine sextant for measuring the elevations (angular altitude) of celestial bodies above the terrestrial ... -
MIL-V-24517
Abstract: This specification covers quiet design, self-contained steam pressure reducing valves for submarines. Intended Use: The quiet-design steam pressure reducing valve specified herein is intended for services ... -
MIL-H-2217D
Abstract: This specification covers 1- and 1-¼-inch inside diameter (id), wire-reinforced hose assemblies for use on submarine rescue chambers designed to operate at depths up to 850 feet. Intended Use: The hose ...Subject(s) : Breathing gas mixture , Hexagonal retainer clamp , Hose coupling , Hydrostatic test , Polymerized chloroprene , -
MIL-I-24768/22
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-V-18030E
Abstract: This specification covers air-diaphragm-operated control valves complete with their associated instrumentation. Intended Use: The diaphragm operated valves specified in this specification are intended for ...Subject(s) : Cobalt alloy , Diaphragm actuator , Monel , Valve , on-off , Valve , throttling ,