درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1861-1880 of 2792
-
MIL-C-24524
Abstract: This specification covers type CL2B magnetic minesweeping cable, a single-conductor, insulated, buoyant connecting-link cable with external plastic flotation elements of ball and socket design. -
MIL-F-16377/20A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
MIL-V-24740
Abstract: This specification covers a high-performance boiler safety valve with a remote, hydraulic, non-steam flow pilot assembly, for steam drum and superheater service at working pressures of 600 and 1500 pounds per square inch ...Subject(s) : At-sea performance , Blowdown , Inclination , Popping pressure , Relieving capacity , Shut down and start up , -
MIL-E-23765B
Abstract: This specification covers the general requirements for solid bare and alloyed cored welding electrode and cut-length rods made from carbon steel, low alloy steel, chromium-nickel steel, nickel base and copper base alloys, ... -
MIL-I-24768/21
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-C-22249/46B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
A-A-59867
Abstract: This commercial item description provides the requirements for the full body crossover style safety harness for use in hazardous fall operations onboard U.S. Navy surface ships, submarines, and shore activities.Subject(s) : Fall Protection , Hardware , Straps , -
MIL-STD-407
Abstract: This document covers the defects for conventional rubber molded items, that is, articles which are made by curing rubber compounds in a forming mold. Cast plastisol items, "O" rings, pneumatic tires and tubes, molded rubber ... -
A-A-50435B
Abstract: The General Services Administration has authorized the use of this commercial item description. -
MIL-T-2118C
Abstract: This specification covers the requirements for thermostatic steam traps for services up to 100 pounds per square inch (lb/in2). Intended Use: Thermostatic traps are installed to drain steam ...Subject(s) : Equipment , galley , Equipment , laundry , Heating coil , Steam radiator , Temperature , differential , Thermostatic element , Thermoventilating heating unit , Union end , -
MIL-PRF-85045/21
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-85045. -
A-A-50618
Abstract: The General Services Administration has authorized the use of this Commercial Item Description.