درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 2321-2340 of 2792
-
DOD-PRF-24574
Abstract: This specification covers lubricating fluid for use in oxidizing gas systems, including oxygen and compressed air. The lubricating fluid is intended for use with oxygen systems at all pressures, and for air and oil-free ... -
MIL-A-19521B
Abstract: Appendix A of this specification establishes basic selection and installation criteria for the application of zinc (type ZEP, ZRN, and ZDM) and iron corrosion preventive anodes to copper, nickel, or iron alloy components ...Subject(s) : Cathodic protection , Corrosion preventive , Fittings , Zinc , -
A-A-59471
Abstract: This commercial item description (CID) covers dry cleaning presses and finishing equipment for Naval shipboard use. -
MIL-I-24092/2A
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for requiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-L-24560/23
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-24368/2B
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-DTL-24231E
Abstract: This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs.Intended Use: The pressure-proof fittings covered in this ... -
A-A-59003/10
Abstract: This commercial item description covers the detailed requirements for an amplifier used to amplify audio frequency signals to drive a group of loudspeakers in an emergency report system onboard a submarine. Intended ... -
MIL-S-24187E
Abstract: This specification covers the general requirements, operating conditions, and tests for linear movement, multipole, multiposition switch assemblies for manual and remote operation. Switch assemblies are for use in low ...Subject(s) : Circuit module , Connectors , Contact configurations , Fuseholders , Fuses , Lampholders , Load circuit operation , Module , Remote control module , Ships wiring connectors , Wire terminal , -
MIL-I-24768/32
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ...