Now showing items 2361-2380 of 2792

    • MIL-DTL-24643/66A INT AMD 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2011
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-24224B VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-STD-2003-5A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This standard covers standard methods for connector fabrication on surface ships and submarines.
      Application. These installation methods are to be used by all installing activities. These methods do not identify ...
      Subject(s) : Cable lead preparation ,
    • MIL-F-16377/37A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1983
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquiringthe fixtures ...
    • MIL-M-28787/293 CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-24095B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1979
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers an automatic portable rectifier type battery charger for charging lead acid batteries. Intended Use: The battery charger is an automatically-regulated, selfcontained charger used ...
    • MIL-P-24691 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers carbon, alloy, and stainless steel seamless and welded pipe and tube. Intended Use: Steel pipes and tubes are intended for various service such as oil, water, steam and gas.
      Subject(s) : Chromium-molybdenum steel , Corrosion resistant , Hydrostatic inspection , Shear wave test , Ultrasonic inspection ,
    • MIL-PRF-28876/11E 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2004
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-S-24521A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1986
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers technical grade sodium nitrite for use as an anti-corrosive agent in boiler preparation. Intended Use: The sodium nitrite covered by this specification is intended for use as a ...
      Subject(s) : Chloride , Insoluble matter , Oxidant , p , Sodium nitrite , technical ,
    • MIL-F-16377/19A VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-R-24049B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1991
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers one type of polypropylene rope. Intended Use: The rope covered by this specification is intended for use where light weight and floatability are required. Polypropylene rope made ...
      Subject(s) : Coils , Splice , Spool , Strand cockles , Yarns ,
    • MIL-D-17847E 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers adsorptive purification and dehydration equipment for removing solid contaminants and particulate and vaporous water and oil from shipboard high pressure air systems. The word dehydrator will be ...
      Subject(s) : Adsorption , Contaminants , Dehydration , Purification ,
    • MIL-F-22963B (1) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-L-3454G 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1991
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification establishes the requirements for packaging (preservation, packing, and marking) of filled and inflatable type life preservers for shipment, stowage and storage.
      Level A (see 3.4.1).
      Level ...
      Subject(s) : Boxes , Caseliners , CO , Containers , Cushioning , Dusting , Packing , Palletization , Preservation , Wrapping ,
    • MIL-C-3993C REINST NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1999
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-W-23223B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1988
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers flexible, light weight, woven, and slotted nylon webbing. Intended Use: Nylon webbing covered by this specification is intended for use in the manufacture of slings.
      Subject(s) : Fabric sling , Flexible textile webbing , Light weight textile webbing , Woven webbing ,
    • MIL-I-24768/16 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
      The requirements for acquiring the insulation material described herein shall consist of this specification ...
    • MIL-C-28754/8C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the connector described herein shall consist of this specification sheet and the issue ...
    • MIL-F-16377/10A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1981
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquiring the fixtures ...
    • MIL-PRF-32107/19 VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2007
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)