درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 2481-2500 of 2792
-
MIL-R-18428A
Abstract: This specification covers several items of special test equipment which will normally be packaged with Radio Set AN/URN-3 to permit a high degree of preventive maintenance and calibration and to insure the greatest possible ... -
MIL-F-16377/55
Abstract: The complete requirements for procuring the bracket described herein shall consist of this document and the latest issue of MIL-F-16377(SHIPS). -
MIL-H-21367/1
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-E-24269B
Abstract: This specification covers the requirements for a 15-pound size, portable, permanent shutoff carbon dioxide (CO2) fire extinguisher and shock proof mounting bracket. Intended Use: Portable ...Subject(s) : Cylinder , compressed gas , Horn , discharge , Hose , discharge , Magnetic , alloy steel , Non-magnetic , aluminum , Non-magnetic , stainless steel , -
MIL-I-742F
Abstract: This specification covers a fire-resistive fibrous glass thermal insulation board. Intended Use: Material covered by this specification is intended for use as hull, compartment, and ventilation duct insulation. ... -
MIL-C-24723
Abstract: This specification covers three nickel-copper alloys for static or centrifugal casting for corrosion resistant service.
Nickel-copper alloy castings shall be of the following compositions, as specified (see 6.2): ...Subject(s) : Alloy , nickel-copper-silicon , Casting , -
MIL-F-16377/46A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
A-A-59008
Abstract: This commercial item description covers both manual and automated backflush type self-cleaning strainers. Intended Use: The strainers specified are intended for installation in sea water piping systems on ...Subject(s) : Automated , Cleaning , Filtration , Manual , Motor , Screen , -
MIL-PRF-24623/4C
Abstract: Intended Use: The splices and shock hardened splice tray are intended for use in all applications inside protective enclosures. The non-hardened splice tray is intended for use in protective enclosures that ... -
MIL-PRF-32307
Abstract: This specification covers triple-offset torque seated (TOTS), quarter turn valves for fuel oil, aviation fuel, lubricating oil, seawater, auxiliary seawater, freshwater, chilled water, and potable water piping system ...Subject(s) : Wafer , lugged , -
MIL-F-16377/45B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ...