درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 941-960 of 2792
-
MIL-PRF-32224
Abstract: This specification covers the performance requirements for both ionization and photoelectric smoke sensors (see 6.8.10 and 6.8.12, respectively) and their universal bases and junction boxes, which are components of an ...Subject(s) : Alarm signal , Flame detector , Flame Detector Zone Module , Smoke detector , Switch Closure Zone Module , -
MS18299
Abstract: This military standard is approved by the Naval Ship Engineering Center, Department of the Navy and shall be used by that activity. All other Military activities are required to employ this standard where suitable. -
DOD-F-24669/3
Abstract: This specification covers alloy steel bars, billets and forgings for nitriding, and requirements for finished components.
Nitriding steel shall be of the following classes, conditions, and finishes, as specified (see ... -
A-A-59004A
Abstract: This description covers a thread lubricant resistant to galling at room temperature, resistant to seizing at elevated temperatures, and having a low coefficient of friction range. -
MIL-H-24653/4
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-I-24768/3
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-F-16377/6A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
MIL-STD-798
Abstract: This standard covers the requirements for nondestructive testing, welding, quality control and identification and HI shock for piping system components. It does not apply to primary side components of nuclear ships. ... -
MIL-C-22249/30B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-STD-740 -2
Abstract: This standard prescribes instrumentation and procedures for the measurement and analysis of, and maximum acceptable level criteria for structureborne vibratory acceleration generated by shipboard equipment.
Structureborne ...Subject(s) : Acceptance criteria , shipboard equipment , Distributed isolation material , Fast fourier transform , Reference vibratory acceleration , Structureborne vibratory acceleration measurements , -
MIL-PRF-900F
Abstract: This specification covers rubber gasket material for watertight and airtight closures, in the temperature range of −20° to 130°F (−28.9° to 54.4°C), and other uses. Intended Use: ...