Show simple item record

MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ALTERABLE FLASH PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:32:49Z
date available2017-09-04T16:32:49Z
date copyright03/14/1996
date issued1996
identifier otherBPQZDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/96279
description abstractThis drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN is be as shown in the following example: CHART
Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
    Device type            Generic number                 Circuit function                       Toggle Speed (Mhz)          01                   7C371                        32 Macrocell CPLD                           66         02                   7C371                        32 Macrocell CPLD                           83


The device class designator is a single letter identifying the product assurance level as follows:
         Device class                                    Device requirements documentation                M                   Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class                                   level B microcircuits in accordance with MIL-PRF-38535, appendix A              Q or V                Certification and Qualification to MIL-PRF-38535


The case outline(s) are as designated in MIL-STD-1835 and as follows:
         Outline letter      Descriptive designator            Terminals         Package style                  X             GQCC1-J44                           44           J leaded chip carrier


The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF 38535, appendix A for device class M.
     Supply voltage range (VCC)- - - - - - - - - - - - - - - -   −2.0 V dc to +7.0 V dc      Programming supply voltage range (VPP)- - - - - - - - - -   −2.0 V dc to +13.5 V dc 2/      DC input voltage range  - - - - - - - - - - - - - - - - -   −2.0 V dc to +7.0 V dc  2/      Maximum power dissapation - - - - - - - - - - - - - - - -    2.5 W  3/      Lead temperature (soldering, 10 seconds)  - - - - - - - -    +260°C      Thermal resistance, junction-to-case (θJC):        Case outline X- - - - - - - - - - - - - - - - - - - - -    See MIL-STD-1835      Junction temperature (TJ) - - - - - - - - - - - - - - - -    +175°C  4/      Storage temperature range - - - - - - - - - - - - - - - -    −65°C to +150°C      Endurance - - - - - - - - - - - - - - - - - - - - - - - -    25 erase/write cycls (minimum)      Data retention  - - - - - - - - - - - - - - - - - - - - -    10 years (minimum)


     Case operating temperature Range(TC)- - - - - - - - - - -    −55°C to +125°C      Supply voltage relative to ground(VCC)- - - - - - - - - -    +4.5 V dc minimum to +5.5 V dc maximum      Ground voltage (GND)  - - - - - - - - - - - - - - - - - -    0 V dc      Input high voltage (VIH)- - - - - - - - - - - - - - - - -    2.2 V dc minimum      Input low voltage (VIL) - - - - - - - - - - - - - - - - -    0.8 V dc maximum      Input rise time (tR)- - - - - - - - - - - - - - - - - - -    100 ns maximum      Input fall time (tF)- - - - - - - - - - - - - - - - - - -    100 ns maximum


     Fault coverage measurement of manufacturing         logic tests (MIL-STD-883, test method 5012)- - - - - -   6/ percent


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-94684num
titleMICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ALTERABLE FLASH PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICONen
typestandard
page19
statusRevised
treeDLA - CC - DLA Land and Maritime:;1996
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record