Show simple item record

HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:33:26Z
date available2017-09-04T16:33:26Z
date copyright40477
date issued2010
identifier otherBPUQCDAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/96845
description abstractThis specification covers pressure-type, wire-reinforced, rubber, hydraulic hose and hose assemblies. The core of this specification uses SAE-J517. The operating pressures range between 625 psi to 7,500 psi (4.3 to 48.3 MPa). The operating temperature range is -40°F to +212°F (-40°C to 100°C).Intended Use: Hose and hose assemblies covered by this specification are intended for use in hydraulic equipment systems at temperatures ranging from -40°F to 200°F (-40°C to 93.3°C). Hoses, type 100R are designed for ground vehicles, hydraulic test stands, and ground support equipment. They are not intended for aircraft use. These hose assemblies are used in vehicle hydraulic systems requiring interoperability and compatibility with military associated components, in combat and or harsh environments.
languageEnglish
titleMIL-DTL-52471F (1)num
titleHOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FORen
typestandard
page23
statusActive
treeDLA - CC - DLA Land and Maritime:;2010
contenttypefulltext
subject keywordsAutomotive
subject keywordsFlexible
subject keywordsFluid
subject keywordsGround carts
subject keywordsLayline
subject keywordsOzone
subject keywordsPermanent
subject keywordsReusable
subject keywordsTest stands
subject keywordsWire reinforced


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record