Show simple item record

MICROCIRCUIT, DIGITAL, FAST, CMOS, 9-BIT WIDE BUFFERED REGISTERS, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:34:03Z
date available2017-09-04T16:34:03Z
date copyright32842
date issued1989
identifier otherUVVUDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/97416
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example: CHART
The device types shall identify the circuit function as follows:
           Device type        Generic number                    Circuit function                  01             54FCT824A         9-bit wide buffered registers, TTL compatible, with                                                  inverted three-state outputs                 02             54FCT824B         9-bit wide buffered registers, TTL compatible, with                                                  inverted three-state outputs


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
        Outline letter                           Case outline                K                  F-6 (24-lead, .640" ×.420" × .090"), flat package               L                  D-9 (24 lead, 1.280" × .310" × .200"), dual-in-line package               3                  C-4 (28-terminal, .460" × .460" × .100"), square chip carrier package


    Supply voltage range - - - - - - - - - - - - - - - -  −0.5 V dc to +7.0 V dc     Input voltage range- - - - - - - - - - - - - - - - -  −0.5 V dc to VCC + 0.5 V dc     Output voltage range - - - - - - - - - - - - - - - -  −0.5 V dc to VCC + 0.5 V dc     DC input diode current (IIK) - - - - - - - - - - - -  −20 mA     DC output diode current (IOK)- - - - - - - - - - - -  −50 mA     DC output current- - - - - - - - - - - - - - - - - -  ±100 mA     Maximum power dissipation (PD) 2/- - - - - - - - - -  500 mW     Thermal resistance, junction-to-case (θJC) - - - - -  See MIL-M-38510, appendix C     Storage temperature range- - - - - - - - - - - - - -  −65°C to +150°C     Junction temperature (TJ)- - - - - - - - - - - - - -  +175°C     Lead temperature (soldering, 10 seconds) - - - - - -  +300°C


    Supply voltage range (VCC)  - - - - - - - - - - - - - +4.5 V dc to +5.5 V dc     Maximum low level input voltage (VIL) - - - - - - - - 0.8 V dc     Minimum high level input voltage (VIH)- - - - - - - - 2.0 V dc     Case operating temperature (TC) - - - - - - - - - - - −55°C to +125°C


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-89665num
titleMICROCIRCUIT, DIGITAL, FAST, CMOS, 9-BIT WIDE BUFFERED REGISTERS, MONOLITHIC SILICONen
typestandard
page15
statusActive
treeDLA - CC - DLA Land and Maritime:;1989
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record