Search
Now showing items 1-10 of 10
ASTM E1908: Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
Abstract: This guide describes a method for selecting samples of building components coated with paints suspected of containing lead. The samples are collected from the debris waste stream created during demolition, renovation, lead hazard control, or abatement projects. The samples are subsequently analyzed in the laboratory for lead.
The debris waste s...
The debris waste s...
ASTM E1368: Standard Practice for Visual Inspection of Asbestos Abatement Projects
Abstract: This practice covers procedures for performing visual inspections of asbestos response actions to:
Establish the extent of the required work before it begins;
Determine the progress and quality of the work and evaluate the completeness of the response action; and
Evaluate the cleanliness of the work area prior to final air t...
Establish the extent of the required work before it begins;
Determine the progress and quality of the work and evaluate the completeness of the response action; and
Evaluate the cleanliness of the work area prior to final air t...
ASTM D6266 REV A: Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
Abstract: This test method describes the determination of the amount of volatile organic compound (VOC) released from applied waterborne automotive coatings that is available for delivery to a VOC control device. The determination is accomplished by measuring the weight loss of a freshly coated test panel subject to evaporation or drying and by analysis of t...
ASTM E1796: Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
Abstract: This guide is intended to provide building users such as private building owners, contractors, architects, homeowners, and regulatory authorities with assistance in selecting an appropriate liquid coating encapsulation product for architectural residence and child-care facility use situations for abating leaded paint. This guide also provides infor...
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings: E1795 - 17
Abstract: This specification covers minimum material performance requirements and laboratory test procedures for nonreinforced liquid coating encapsulation products (single or multiple-coat systems) for leaded paint in buildings. ...
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings: E1797
Abstract: This specification covers minimum material performance requirements and laboratory test procedures for reinforced liquid coating encapsulation products (single- or multiple-coat systems) for leaded paint in buildings. It ...