درباره ما
ASCE - American Society of Civil Engineers: Recent submissions
Now showing items 61-80 of 168
-
ASCE 43-05
Abstract: INTRODUCTION
OVERVIEW OF THE SEISMIC DESIGN CRITERIA
This Standard provides criteria for seismic design of safety-related Structures, Systems, and Components (SSCs) in a broad ... -
ASCE 7-10 WIND LOADS
Abstract: Objective of the Guide
The objective of this guide is to provide direction in the use of wind load provisions of ASCE 7-10 (referred to as "the Standard"). The Commentary of ASCE 7-10 (chapters C26 ... -
ASCE 10-97
Abstract: Design of Latticed Steel Transmission Structures specifies requirements for the design, fabrication, and testing of members and connections for electrical transmission structures. These requirements are applicable ... -
ASCE 41258
Abstract: OBJECTIVES AND SCOPE
The objective of this committee was to update the previous report, summarizing the State-of-the-Practice for the design of cast-in-place anchor rods, welded anchors, and post-installed ... -
ASCE 28-00
Abstract: This Practice covers design and recommended installation procedures for precast concrete box sections for jacking in trenchless construction intended for the conveyance of sewage, industrial wastes, storm water and drainage ... -
ASCE 30-14
Abstract: SCOPE AND INTENT
The intent of this standard is to provide a guideline and methodology for assessing the condition and performance of existing building envelope systems and components and identifying ... -
ASCE MOP 131
Abstract: INTRODUCTION
This chapter provides a general overview of the potential benefi ts of irrigation canal modernization and discusses considerations for assessing whether an irrigation or water district ... -
ASCE MOP 123
Abstract: PREFACE
The purpose of this manual is to provide the reader with a basic knowledge of the principles and methods for the design, manufacturing, and use of prestressed spun- and static-cast concrete ... -
ASCE 48-11
Abstract: Design of Steel Transmission Pole Structures specifi es requirements for the design, fabrication, testing, assembly, and erection of cold-formed tubular members and connections for steel electrical transmission ... -
ASCE 16-95
Abstract: This standard provides design criteria for structures constructed of structurally graded lumber, structural glued laminated timber, panel products, poles, piles, and other structural wood components, and their connections. ... -
ASCE 10-15
Abstract: Design of Latticed Steel Transmission Structures specifies requirements for the design, fabrication, and testing of members and connections for electrical transmission structures. These requirements are applicable ... -
ASCE 24-14
Abstract: This standard provides minimum requirements for fl ood resistant design and construction of structures that are subject to building code requirements and that are located, in whole or in part, in Flood Hazard Areas. This ... -
ASCE 39-03
Abstract: The project target area generally is the geographical area or portion thereof in which the sponsoring entity has an interest. If the project is to reduce property damage, the focus will be on areas in which property is ... -
ASCE MOP 125
Abstract: PURPOSE AND SCOPE OF MANUAL
The purpose of this manual is to provide design engineers, utility managers, educators, and planners with a concise listing and description of the most commonly used types ...