Show simple item record

ACI 533R

Guide for Precast Concrete Wall Panels

contributor authorACI - American Concrete Institute
date accessioned2017-09-04T16:51:10Z
date available2017-09-04T16:51:10Z
date copyright01/01/2011
date issued2011
identifier otherWPXSUEAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std/handle/yse/114767
description abstractThis document provides guidelines for specifying, planning, designing, fabrication, and erecting precast concrete wall panels. Although the focus is on precast wall panels produced in established precasting plants, site precasting is an option that has been used successfully. Tilt-up concrete, as discussed in ACI 551.1R-05, is a variation of site precasting. ACI 533R should aid in establishing and maintaining quality site fabrication as well as plant fabrication of precast wall panels.
This guide covers non-load-bearing or load-bearing panels, fabricated of normal or lightweight concrete. Panels may be one of the following types:
• Solid
• Insulated (sandwich)
• Ribbed
• Hollow-core
• Sculptured
In addition to reinforced panels, lightly prestressed (effective prestress, after all losses, between 150 and 225 psi [1.0 and 1.7 MPa]) and prestressed panels are covered. Structural design considerations addressed in Chapter 3 include the use of panels as shear wall components.
Emphasis is placed on wall panels with an integral exposed aggregate concrete surface finish. Smooth wall panels and panels with a textured or shaped architectural surface finish are included. Panels having natural stone veneer or ceramic veneer finishes are not covered in detail.
languageEnglish
titleACI 533Rnum
titleGuide for Precast Concrete Wall Panelsen
typestandard
page52
statusActive
treeACI - American Concrete Institute:;2011
contenttypefulltext
subject keywordsadmixtures
subject keywordsaggregates
subject keywordsarchitectural concrete
subject keywordscoatings
subject keywordscracking (fracturing)
subject keywordscuring
subject keywordsdeflection
subject keywordsdesign
subject keywordsdrying shrinkage
subject keywordsfabrication
subject keywordsformwork
subject keywordsinspection
subject keywordsinstallation joints (junction)
subject keywordsprecast concrete panels
subject keywordsrepairs
subject keywordssandwich panels
subject keywordssealants
subject keywordsstructural design
subject keywordssurface defects
subject keywordstolerances
subject keywordsvolume change


Files in this item

Thumbnail
Name:
WPXSUEAAAAAAAAAA.pdf
Size:
1.522Mb
Format:
PDF
View/Open

This item appears in the following Collection(s)

Show simple item record