درباره ما
EIA - Electronic Industries Alliance: Recent submissions
Now showing items 21-27 of 27
-
EIA RS-186-10E
Abstract: PURPOSE
This test is performed to determine the effect of normal soldering operations on component parts. Excessive changes in electrical characteristics or mechanical damage to a component part are ... -
EIA RS-186-1E
Abstract: PURPOSE
This test is intended to evaluate the effect of absorption and diffusion of moisture and moisture vapor on component parts. The test in an artificial environmental test, accelerated to shorten ... -
EIA EIA-468-C
Abstract: INTRODUCTION AND SCOPE
This standard was formulated to provide dimensions and tolerances necessary to lead tape components in the radial format (unidirectional leads) such that they may be automatically ... -
EIA RS-186-9E
Abstract: This standard defines a test for solderability of solid lead wires, terminals, and conductive accessories of component parts which are to be joined b a soldering operation involving the use of rosin type flux and solder ... -
EIA CB6-A
Abstract: This document has been compiled in response to a generally expressed desire on the part of both users and manufacturers for a guide to the use of quartz crystal units for frequency control so that they may be used to their ... -
EIA RS-186-8E
Abstract: PURPOSE
This sinusoidal high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency range of 10 to 500 Hz or 10 to 2000 Hz as ... -
EIA RS-186-4E
Abstract: PURPOSE
This dielectric test is performed for the purpose of determining the ability of component parts to withstand a potential at sea level or at a specified altitude. The potential used is normally ...