JSA - Japanese Standards Association: Recent submissions

Now showing items 101-120 of 2957

    • JSA JIS G 1215-4 AMD 2 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS H 1322 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the method for determination of 10 components given in Table 1 in magnesium and magnesium alloys by spark discharge atomic emission spectrometric analysis.

    • JSA JIS K 0071-1 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies a method for estimating the colour of chemical products which are liquid at ordinary temperature, or of those which, when heated, become molten state. It is applicable to clear liquid having a colour ...

    • JSA JIS Z 3140 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the grades, inspection method and acceptance criteria for resistance spot welds (hereafter referred to as welds) of mild steel, low alloy steel, high strength steel, stainless ...

    • JSA JIS G 4903 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies seamless nickel-chromium -iron alloy pipes (hereafter referred to as pipes) to be used for piping for corrosion -resistance and elevated temperature service. The supplementary ...

    • JSA JIS B 8265 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS B 7525-1 

      Type: standard
      Source: JSA - Japanese Standards Association:;2018
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies requirements for five basic series (L20, L50, M50, M100 and S50) of glass density hydrometers of constant mass that are graduated to indicate density (kg/m3 or g/cm3) at 20 °C or 15°C ...

    • JSA JIS Z 3283 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies resin flux cored solders made in a wire form incorporating in the centre a flux, which is used for wiring connections in electrical, electronic and communication devices and for manufacture of parts. ...

    • JSA JIS H 2150 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies magnesium ingots (hereafter referred to as ingots) which are produced by thermal reduction or electrolytic method, and used for melting or refining process NOTE: The International Standard corresponding ...

    • JSA JIS K 6260 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies a method of test intended for use in comparing the resistance of vulcanized or thermoplastic rubbers to the formation and growth of cracks, when subjected to repeated flexing on the De Mattia type ...

    • JSA JIS B 7736 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies a method for calibration of reference blocks to be used for the indirect verification of Brinell hardness testing machines specified in JIS B 7724 (hereafter referred to as reference blocks). NOTE: ...

    • JSA JIS B 7549 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the liquid filled system thermometers (hereafter referred to as thermometers) consisting of a temperature sensitive cylinder, a conduit tube and a pressure conversion part, all ...

    • JSA JIS G 3106 AMD 1 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: There is no abstract information for this document.

    • JSA JIS Z 1601 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the characteristics and dimensions of non-removable head (tight head) drums, manufactured from steel sheet, having a total capacity of 212 L, 216.5 Land 230 L (hereafter referred to as drums). NOTE: ...

    • JSA JIS B 1701-2 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the values of normal modules for involute spur gears and helical gears for general engineering and heavy engineering. This Standard is not applicable to gears used in automotive field. NOTE: The ...

    • JSA JIS G 3350 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Japanese Industrial Standard specifies the cold formed light gauge steel sections intended for buildings and other structures (hereafter referred to as light gauge sections). For light gauge sections which are ...

    • JSA JIS K 6261-4 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies a method for the determination of the temperature-retraction characteristics of vulcanized and thermoplastic rubbers where the temperature at which the test piece, stretched and then frozen at low ...

    • JSA JIS G 0597 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the accelerated corrosion test procedures for the evaluation of corrosion behaviour of in atmospheric environments. It also specifies the apparatus used. The tests involve salt deposition and ...

    • JSA JIS G 3118 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the hot-rolled carbon steel plates used mainly for pressure vessels for intermediate and moderate temperature services (hereafter referred to as steel plates). NOTE: The International ...

    • JSA JIS K 6224 

      Type: standard
      Source: JSA - Japanese Standards Association:;2017
      Organization : JSA - Japanese Standards Association
      Abstract: This Standard specifies the test methods for physical and chemical properties of magnesium oxide used as a rubber compounding ingredient. NOTE: The International Standard corresponding to this Standard and the symbol of ...