JSA - Japanese Standards Association: Recent submissions
Now showing items 181-200 of 2957
-
JSA JIS C 5504
Abstract: Scope: This Standard specifies electrodynamic horn type loudspeakers, which are used for general voice amplifiers in telecommunications\' equipment (hereafter referred to as loudspeakers). This Standard is not applicable ... -
JSA JIS G 3505
Abstract: Scope: This Standard specifies low carbon steel wire rods (hereafter referred to as wire rods) to be used for the manufacture of the low carbon steel wire, zinc-coated low carbon steel wire, etc. It is not applicable to ... -
JSA JIS Z 2355-2
Abstract: Scope: This Standard specifies the measuring methods of performances of ultrasonic thickness measuring equipment and acceptance criteria using the ultrasonic pulse-echo method by a single or double crystal probe. This ... -
JSA JIS C 3662-5
Abstract: Scope: This Standard specifies polyvinyl chloride insulated flexible cables (cords) of rated voltages up to and including 300/500 V. All cables comply with the appropriate requirements given in JIS C 3662-1, and each ... -
JSA JIS G 3114
Abstract: Scope: This Standard specifies hot-rolled atmospheric corrosion resisting steels (hereafter referred to as "steel products") for bridges, architecture and other welded structure. NOTE: The International Standard corresponding ... -
JSA JIS D 9414
Abstract: Scope: This Japanese Industrial Standard specifies brakes of bicycles for general use and for young children specified mainly in JIS D 9111. -
JSA JIS C 8461-21
Abstract: Scope: Clause 1 of JIS C 8461-1: 2012 (hereafter referred to as part 1) applies, except as follows. This Standard specifies the requirements for rigid conduit systems. NOTE: The International Standard corresponding to this ... -
-
JSA JIS B 7507
Abstract: Scope: This Standard specifies callipers equipped with analogue or digital indicating devices with either a vernier scale or a circular scale. NOTE: The International Standard corresponding to this Standard and the symbol ... -
JSA JIS K 6741
Abstract: Scope: This Standard specifies the unplasticized poly(vinyl chloride) (PVC-U) pipes and impact-resistant unplasticized poly(vinyl chloride) (PVC-U) pipes (hereafter referred to as pipes) used mainly for piping to convey ... -
JSA JIS C 8461-22
Abstract: Scope: Clause 1 of JIS C 8461-1: 2012 (hereafter referred to as part 1) applies, except as follows. This Standard specifies requirements for pliable conduit systems including selfrecovering conduit systems. NOTE: The ... -
JSA JIS T 8106
Abstract: Scope: This Standard specifies a method of test for the slip resistance of protective and occupational footwear used in the work places of manufacturing, construction, transportation, food retailing industries and other ... -
JSA JIS T 8147
Abstract: Scope: This Standard specifies personal eye-protectors (hereafter referred to as eye-protectors) intended to protect the eyes of workers from airborne dust, chemical droplets, flying objects, etc and the replacement lenses ... -
JSA JIS A 5373
Abstract: Scope: This Japanese Industrial Standard specifies the precast prestressed concrete products (hereafter referred to as PC products). However, this Standard is not applied to the concrete products for buildings separately ... -
JSA JIS H 4751
Abstract: Scope: This Japanese Industrial Standard specifies seamless zirconium alloy tubes (hereafter referred to as "tubes") used for nuclear fuel cladding. -
JSA JIS L 1910
Abstract: Scope: This Standard specifies the test methods for percentage of loss in strength of oxygenbleached textiles. -
JSA JIS K 6778
Abstract: Scope: This Standard specifies polybutene pipes (hereafter referred to as "pipes") to be used mainly for the conveyance of water at 90 °C or lower. The polybutene pipes are intended to be used for installations within ... -
JSA JIS B 7522
Abstract: Scope: This Japanese Industrial Standard specifies band shaped tape measures which have been manufactured from textile material and treated with synthetic resin (hereafter referred to as tape measures). -
-
JSA JIS G 3455
Abstract: Scope: This Standard specifies the carbon steel pipes (hereafter referred to as "pipes") used for high pressure service at temperatures 350°C or lower mainly used for machine parts. NOTE 1 The dimensional range covered ...