درباره ما
Browsing ASQ - American Society for Quality by Issue Date
Now showing items 1-20 of 57
-
ASQ Q3
Abstract: Application
Sampling plans designated in this publication are applicable, but not limited, to inspection of the following:
a. end items
b. components and raw materials
c. services
d. ... -
ASQ Q2
Abstract: SCOPE AND FIELD OF APPLICATION
This standard describes a basic set of elements by which laboratory quality management systems can be developed and implemented.
It is intended as a guideline and ... -
ASQ S2
Abstract: Section 1 gives general information on methods of acceptance sampling inspection with particular reference to the sampling procedures and tables for inspection by attributes given in ANSVASQC 21.4, ANSIíASQC 43, ... -
ASQ D1160
Abstract: This American National Standard makes recommendations for the implementation of design review procedures as a means of stimulating product and/or process improvement. It includes guidelines for planning and conducting ... -
ASQ M1
Abstract: This standard specifies general requirements for assuring the quality of calibration in accordance with established practices or objective quality control techniques. This standard delineates the requirements for systems ... -
ASQ E2
Abstract: This standard provides guidance for an inspection planning system, identifies elements of the inspection planning process, and includes a section which presents techniques for the preparation of inspection plans for specific ... -
ASQ B1-B3
Abstract: This standard is intended as a guide for handling problems concerning the economic control of quality of materials, manufactured products, services, etc. It has particular reference to methods of collecting, arranging, and ... -
ASQ C1
Abstract: APPLICABILITY
When this American National Standard is prescribed on specified by contract or management directive, it provides a specification of the general requirements to be met by the quality program ... -
ASQ D61078
Abstract: This International Standard describes procedures for modelling the dependability of a system and for using the model in order to calculate reliability and availability measures.
A standard set of symbols related to ... -
ASQ D61165
Abstract: This International Standard provides guidance on the application of Markov techniques to dependability analysis. -
ASQ Q9000-3
Abstract: This part of ANSI/ISO/ASQC Q9000 sets out guidelines to facilitate the application of ANSI/ISO/ASQC 4900 1 - 1994 for organizations developing, supplying, installing and maintaining computer software. It does not add to, ... -
ASQ D61123
Abstract: This International Standard specifies procedures for applying and preparing compliance test plans for success ratio or failure ratio.
The procedures are based on the assumption that each trial is statistically independent. -
ASQ Q9000-2
Abstract: This part of ANSI/ISO/ASQC 49000 gives guidance on the application of the 1994 versions of ANSI/ISO/ ASQC Q9001, ANSI/ISO/ASQC Q9002 and ANSI/ ISO/ASQC Q9003.
It does not add to, or otherwise change, the requirements ... -
ASQ D61164
Abstract: This International Standard gives models and numerical methods for reliability growth assessments based on failure data from a single system which were generated in a reliability improvement programme. These procedures ... -
ASQ D60300-3-1
Abstract: This International Standard gives a general overview of commonly used dependability analysis procedures. It describes the usual methodologies, the advantages and disadvantages, data input and other requirements for the ... -
ASQ D61070
Abstract: This International Standard specifies techniques for availability performance testing of frequently maintained items when the availability performance measure used is either steady-state availability or steady-state ... -
ASQ ISO 14041
Abstract: General
This International Standard specifies requirements for a quality management system where an organization
a) needs to demonstrate its ability to consistently provide product that meets customer and ...