Recent Submissions

  • BHMA A156.20 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2012
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for Strap Hinges, Tee Hinges, and Hasps, and includes performance tests covering operational and strength criteria.
    Tests described in this Standard are performed under laboratory ...
  • BHMA A156.6 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard contains requirements for door protection plates, door edgings, push plates, door pulls, push bars, and pull bars. Included are strength and finish tests, and dimensional and material criteria.
    Tests ...
  • BHMA A156.16 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2008
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for auxiliary hardware and includes performance tests covering operational, cyclical, strength or finish criteria.
    Tests described in this Standard are performed under laboratory ...
  • BHMA A156.17 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for Self Closing Hinges & Pivots. Cycle tests, operational tests, finish tests, material and dimensional requirements are included.
    Tests described in this Standard are performed ...
  • BHMA A156.13 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2012
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes performance requirements for Mortise Locks and Latches and includes operational, cycle, strength, material evaluation, security, and finish tests, and dimensional criteria.
    Tests described in ...
  • BHMA A156.5 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: ANSI/BHMA A156.5 establishes requirements for mechanical cylinders, push button mechanisms, and electrified input devices which include security tests, operational tests, finish tests, and dimensional criteria.
    Related ...
  • BHMA A156.11 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included.
    Tests described in this Standard are performed ...
  • BHMA A156.8 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for overhead door stops and holders, and includes performance tests covering operational, cyclical, strength and finish criteria.
    Tests described in this Standard are performed ...
  • BHMA A156.9 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard contains requirements for cabinet hardware and includes hinges, knobs, pulls, catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. Included ...
  • BHMA A156.2 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2011
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes performance requirements for bored and preassembled locks and latches, and includes cycle tests, strength tests, operational tests, security tests, material evaluation tests, finish tests, and ...
  • BHMA A156.21 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2009
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for thresholds. Types are described with identifying numbers. Strength tests, fastening systems, and gasketing tests are included.
    Tests described or referenced in this Standard ...
  • BHMA A156.23 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2010
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for electromagnetic locks and includes cyclical, dynamic, operational, strength and finish tests. This product is used for access control.
    Tests described in this Standard are ...
  • BHMA A156.10 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2011
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: Requirements in this Standard apply to power operated doors for pedestrian use which open automatically when approached by pedestrians and some small vehicular traffic or by a knowing act. Included are provisions to reduce ...
  • BHMA A156.4 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2013
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, ...
  • BHMA A156.14 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2013
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, abuse, durability static load, smoothness, static friction, kinetic friction and finish tests are included. Hardware for light to ...
  • BHMA A156.18 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2012
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes finish test methods and code numbers for finishes on various base materials. It includes criteria for viewing comparative finishes to the BHMA match plates and establishes five categories of finishes.
  • BHMA A156.19 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2013
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: GENERAL 
    Requirements in this Standard apply only to swing door operators. The operator types are power assist, and low energy power operators, for pedestrian use, and some small vehicular use. ...
  • BHMA A156.24 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2012
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This standard covers products used in connection with conventional exit devices or locks causing the doors to remain locked after releasing actuation for a predetermined length of time. Performance criteria are included ...
  • BHMA A156.12 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2013
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes performance requirements for Interconnected Locks and and includes operational, cycle, strength, material evaluation, security, and finish tests.
    Tests described in this Standard are performed ...
  • BHMA A156.15 

    Type: standard
    Source: BHMA - Builders Hardware Manufacturers Association Inc.:;2011
    Organization : BHMA - Builders Hardware Manufacturers Association Inc.
    Abstract: This Standard establishes requirements for door closers combined with hold-open devices or freeswinging door closers combined with releasing devices and includes performance tests covering operational, cyclical and finish ...

View more