درباره ما
ANSI - American National Standards Institute
Browse by
Recent Submissions
-
ANSI INCITS 203
Abstract: This standard provides the requirements for the helical-scan recording method and the Digital Data Storage (DDS) recorded format of a 3.81-mm (0.150-in) magnetic tape cartridge to be used for information interchange between ... -
ANSI INCITS 126
Abstract: This standard specifies the general, physical, and magnetic requirements for interchangeability of the one- or two-sided, 5.25-inch (130.mm) (nominal), 96-tracks-per-inch (tpi) (3,8-tracks-per-millimeter (tpmm)) flexible ... -
ANSI INCITS 17
Abstract: This standard prescribes shapes and sizes of OCR-A alphanumeric characters and symbols for optical character recognition (OCR) systems. Purpose. The purpose of this standard is to establish both a machine-readable and ... -
ANSI INCITS 21
Abstract: This standard specifies the size and location of rectangular holes in twelve-row 3%-inch wide punched cards. To be a processable document, suitable for information interchange. cards must also meet USA Standard Specifications ... -
ANSI INCITS 39
Abstract: Scope.This standard provides specifications for format and recording for a l/2-inch (12.7-mm), 9-track magnetic tape to be used for information interchange among information processing systems, communication systems, and ... -
ANSI INCITS 428
Abstract: A standard application programming interface (API) defines a scope within which, and a grammar by which it is possible to write application software without attention to vendor-specific infrastructure behavior. SM-HBA ... -
ANSI INCITS 94
Abstract: The following items are within the scope of this standard (1)The sytax of PANCM ( Programming Aid for Numerically controlled Manufacturing), including not only the overall syntax of a program, but also the order in which ... -
ANSI INCITS 55
Abstract: This standard, for an unrecorded cartridge containing 0.250 in (6.30 mm) magnetic tape, presents the minimum requirements for the mechanical and magnetic interchangeability of the cartridge between information processing ... -
ANSI INCITS 197
Abstract: This standard provides the requirements for a tape cartridge to be used for information interchange among information-processing systems, communication systems, and associated equipment. This standard provides the general ... -
ANSI INCITS 120
Abstract: This standard provides the mechanical, physical, and magnetic properties of a magnetic disk with a 7.874-in (200-mm) diameter and low surface friction intended for mounting in data storage devices. A typical recording ... -
ANSI INCITS 209
Abstract: This standard describes the matrix of dot placement and size limits for OCR-MB alphanumeric characters and symbols for optical character recognition (OCR) systems. Purpose The purpose of this standard is to establish a set ... -
ANSI INCITS 427
Abstract: This standard describes in detail the services accessed by well-known addresses defined in FC-FS- 2. Generic Services described in this document are: a) Directory Service; b) Management Service; c) Event Service; and d) ... -
ANSI INCITS 364 AMD 1
Abstract: This amendment to ANSI INCITS 364-2002, Information Technology - Fibre Channel - 10 Gigabit, corrects the definition of the clock synchronization primitives to comply with ANSI INCITS 424-2007, Information Technology - ... -
ANSI INCITS 93M
Abstract: This standard specifies the location of OCR-A and OCR-Bc haractersin relationshipt o other characterso n a documento r pagea nd to reference points of the document or page. Purpose. The purposeo f this standard is to ... -
ANSI INCITS 11
Abstract: This standard specifies the quality of paper, dimension and quality of general purpose cards, and test methods for general purpose cards of 7⅜-inch length. This standard is intended to apply to general purpose in ... -
ANSI INCITS 119
Abstract: This standardp rovidest he mechanical,p hysical, and magnetic properties of a magnetic disk with an 8.268 in (2 10 mm) diameter and low surface friction intended for mounting in data storaged evices.A typical recording ... -
ANSI INCITS 189
Abstract: CCITT Recommendation X.32 (1988) (henceforth referred to as CCITT Recommendation X.32 or X.32) specifies the interface between Data Terminal Equipment and Data Circuit- Terminating Equipment for terminals operating in the ... -
ANSI INCITS 89
Abstract: This standard specifies the general, physical, and mag netic requirements for interchangeability of the singledisk cartridge (front loading) as required to achieve unrecorded cartridge interchange between disk storage ... -
ANSI INCITS 426
Abstract: This standard is one of the Fibre Channel family of standards. This standard describes the protocols used to implement security in a Fibre Channel fabric. This standard includes the definition of protocols to authenticate ... -
ANSI INCITS 205
Abstract: This standard provides the requirements for the helical-scan recording method and the Data/DAT recorded format of a 3.81 -mm (0.150-in) magnetic tape cartridge to be used for information interchange between information ...