BATTELLE - BMI - Battelle Memorial Institute

 

Recent Submissions

  • BATTELLE MMPDS-07 CHAPTER 8 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: STRUCTURAL JOINTS
    This chapter, while comprising three major parts, primarily is concerned with joint allowables. Part 8.1 is concerned with mechanically fastened joints; Part 8.2, with metallurgical ...

  • BATTELLE MMPDS-07 CHAPTER 5 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    This chapter contains the engineering properties and related characteristics of titanium and titanium alloys used in aircraft and missile structural applications.
    General comments on ...

  • BATTELLE MMPDS-07 CHAPTER 7 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    This chapter contains the engineering properties and related characteristics of miscellaneous alloys and hybrid materials. In addition to the usual properties, some characteristics relating to ...

  • BATTELLE MMPDS-07 CHAPTER 2 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    The selection of the proper grade of steel for a specific application is based on material properties and on manufacturing, environmental, and economic considerations.

  • BATTELLE MMPDS-07 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: FOREWORD
    This document contains design information on the mechanical and physical properties of metallic materials and joints commonly used in aircraft and aerospace vehicle structures. All ...

  • BATTELLE MMPDS-07 CHAPTER 1 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: SCOPE OF HANDBOOK — The primary purpose of this Handbook is to provide a source of statistically based design values for commonly used metallic materials and joints. Additionally, other mechanical and physical ...

  • BATTELLE MMPDS-07 CHAPTER 3 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    This chapter contains the engineering properties and related characteristics of wrought and cast aluminum alloys used in aircraft and missile structural applications.
    General comments on ...

  • BATTELLE MMPDS-07 CHAPTER 4 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    This chapter contains the engineering properties and characteristics of wrought and cast magnesium alloys used in aircraft and missile applications. Magnesium is a lightweight structural metal ...

  • BATTELLE MMPDS-07 CHAPTER 9 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: INTRODUCTION - Design properties in MMPDS are used in the design of aerospace structures and elements. Thus, it is exceedingly important that the values presented in MMPDS reflect as accurately as ...

  • BATTELLE MMPDS-07 CHAPTER 6 

    Type: standard
    Source: BATTELLE - BMI - Battelle Memorial Institute:;2012
    Organization : BATTELLE - BMI - Battelle Memorial Institute
    Abstract: GENERAL
    Heat-resistant alloys are arbitrarily defined as iron alloys richer in alloy content than the 18 percent chromium, 8 percent nickel types, or as alloys with a base element other than iron and ...