MSS SP-108

Resilient-Seated Cast Iron Eccentric Plug Valves

contributor author	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.
date accessioned	2017-09-04T17:39:17Z
date available	2017-09-04T17:39:17Z
date copyright	01/01/2012
date issued	2012
identifier other	DSCUUEAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/162219
description abstract	This Standard Practice covers quarter-turn eccentric cast iron plug valves having flanged, threaded, mechanical joint, or grooved end connections. This Standard Practice is intended for resilient seated valves with a circular, rectangular, or other geometric seat configuration, having no visible evidence of leakage. The size range covered is NPS 3 through NPS 72 (DN 80 through DN 1800). Typical applications are sewage, sludge, waste water, and water service. The manufacturer should be consulted for other applications. Conditions of water hammer, hydraulic pulsation, and excessive operating noise are results of the system design rather than valve design and require special design and construction considerations.
language	English
title	MSS SP-108	num
title	Resilient-Seated Cast Iron Eccentric Plug Valves	en
type	standard
page	14
status	Active
tree	MSS - Manufacturers Standardization Society of the Valve and Fittings Industry.:;2012
contenttype	fulltext