Browsing ABMA - American Bearing Manufacturers Association by Author "ABMA - American Bearing Manufacturers Association"

Now showing items 1-20 of 76

      • ABMA 10285 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1992
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 104 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1994
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This International Standard specifies the major boundary dimensions of single-direction and doubledirection thrust bearings with flat back faces.
        In addition, it gives the minimum bore diameters of housing washers and ...

      • ABMA 10A 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;2008
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This standard establishes the requirements for metal balls for unground rolling contact bearings and other uses. The requirements for finished balls for roiling contact bearings are contained in ANSI/ABMA/ISO 3290.

      • ABMA 11 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;2008
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: Purpose of Standard
        Roller bearing performance is a function of many variables. These include the bearing design, the characteristics of the material from which the bearings are made, the way in which they are manufactured, ...

      • ABMA 12.1 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1992
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This standard covers the characteristics that define metric design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for ...

      • ABMA 12.2 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1992
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This standard covers the characteristics that define inch design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for ...

      • ABMA 12240-1 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1998
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This part of IS0 12240 specifies dimension series, tolerances and radiai internal clearances for radial spherical plain bearings.
        The dimensions and tolerances specified in this part of IS0 12240 have been selected to ...

      • ABMA 12240-2 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1998
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This part of IS0 12240 specifies dimensions and tolerances for angular contact radial spherical plain bearings.
        The specified tolerance values apply to finished, angular contact radial spherical plain bearings before ...

      • ABMA 12240-3 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1998
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 12240-4 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1998
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1987
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: Purpose. Under certain operating conditions, vibration in rotating rolling bearings can be of importance as an operating characteristic of such bearings. For this reason, the measurement of vibration emitted ...

      • ABMA 13411 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This International Standard specifies the required characteristics, inspections and tests, quality assurance and conditions for qualification, static radial loads, acceptance and delivery conditions for needle roller, ...

      • ABMA 13412 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13413 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13414 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13415 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13416 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 13417 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1997
        Organization : ABMA - American Bearing Manufacturers Association

      • ABMA 14 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1995
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This standard specifies boundary dimensions and tolerances for ball bearings with spherical outside surfaces and extended inner ring width. The feature of mating housing and bearing spherical surfaces is intended to provide ...

      • ABMA 14190 

        Type: standard
        Source: ABMA - American Bearing Manufacturers Association:;1998
        Organization : ABMA - American Bearing Manufacturers Association
        Abstract: This Intemational Standard specifies the required characteristics, inspections and tests, quality assurance and conditions for qualification, permissible static loads, acceptance and delivery conditions for rigid and ...