درباره ما
NASA-LLIS-1040
Lessons Learned – Dimensional stability of dissimilar materials in operational and non-operational environments where excessive or unintentional heating may occu
| contributor author | NASA - National Aeronautics and Space Administration (NASA) | |
| date accessioned | 2017-09-04T17:46:44Z | |
| date available | 2017-09-04T17:46:44Z | |
| date copyright | 08/22/2001 | |
| date issued | 2001 | |
| identifier other | EMUEQCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/169912 | |
| description abstract | Description of Driving Event: In order to mitigate pilot seal extrusion-related failures of the Primary Reaction Control System (PRCS) pilot-operated valve (POV), effort were made to develop a redesigned POV (RPOV) pilot seat assembly. The POV controls the flow of hypergolic liquid propellants to the Space Shuttle Orbiter attitude control thrusters. During the redesign, specific factors were found to be essential in fabricating a dimensionally stable pilot seal. Seal Extrusion. Seal extrusion (Figure 1) is caused by thermal expansion mismatch between adjacent PTFE and metal parts in the POV or RPOV, and is potentially aggravated by: • excessive internal stress or internal stress gradients in as-fabricated pilot seals • low seal exit area relative to entrapped seal volume • thermal cycling during seat assembly (e.g., retainer welding) • vacuum bake-outs during periodic thruster maintenance • heat soak-back after thruster firing, especially multiple sequential burns or long burns • any presence of oxidizer vapor close to a fuel pilot seal Data on semi-trapped PTFE specimens simulating a POV seal configuration show that extrusion is: • incremental and irreversible • increases with the size of the thermal excursion • decreases with successive thermal cycling (stress relief) • is accompanied by gap formation in the seal cavity The above factors must be considered when developing a viable pilot seal. | |
| language | English | |
| title | NASA-LLIS-1040 | num |
| title | Lessons Learned – Dimensional stability of dissimilar materials in operational and non-operational environments where excessive or unintentional heating may occu | en |
| type | standard | |
| page | 5 | |
| status | Active | |
| tree | NASA - National Aeronautics and Space Administration (NASA):;2001 | |
| contenttype | fulltext | |
| subject keywords | Hardware | |
| subject keywords | Parts Materials & Processes | |
| subject keywords | Research & Development | |
| subject keywords | Test & Verification |
