درباره ما
AIR FORCE - 70 - Air Force Sustainment Center - Ogden
Browse by
Recent Submissions
-
MIL-T-6192C
Abstract: This specification covers one type of weather-condition map trainer. Intended Use: The weather condition map trainer is intended for use in classroom instruction to teach personnel in the recognition of cloud ... -
MIL-B-8493
Abstract: This specification covers one type of aircraft camera body for obtaining 9 by 18 inch reconnaissance photographs when used in conjunction with interchangeable lens cones and film magazines. The camera body is designated ... -
MIL-L-6604
Abstract: This specification covers one type of 24-inch f/6.0, 9 × 9 inch format, aircraft reconnaissance camera lens cone utilizing an intra-lens shutter and diaphragm, designated Type C-5. The lens cone is intended for use ... -
MIL-STD-805B
Abstract: This standard covers general design requirements for towing fittings and provisions which are an integral part of military aircraft equipped with a wheel-type landing gear or skids.
The function of this standard shall ...Subject(s) : Aircraft towing fittings and provisions , Fittings and provisions for towing aircraft , Provisions , fittings for aircraft towing , Towing fittings and provisions , aircraft , -
MIL-B-38634
Abstract: This specification establishes the requirement for one type of fire bomb, designated BLU-32A/B, designed for suspension and release from 14 inch ejector type bomb racks of light bombardment and fighter-bomber type aircraft, ... -
MIL-B-9716A
Abstract: This specification covers one type of detonating burster for use with the MC-1 750 pound bomb. Intended Use: This burster is intended to be used as the detonating burster for the MC-1 bomb. -
MIL-PRF-5041K
Abstract: This specification covers requirements for aircraft pneumatic tube type and tubeless ribbed tread tires intended for use on aircraft wheels. Intended Use: Tires covered by this specification are intended for ...Subject(s) : Bead seating pressure , Cut-limit dimension , Fabric reinforced tread , Fabric tread , Ply rating , Rated inflation pressure , Rated load , Skid depth , Tread chunking , Tube type , Tubeless , -
MS27818 REV A VALID NOTICE 2
Abstract: NOTICE OF VALIDATION
MS-27818A (USAF) dated 1 April 1978, has been reviewed and determined to be valid for use in acquisition.